January allocation from 3000 to 3300/3400.
#561
Racer
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
#562
Advanced
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Thanks! My car was built on 03/09. Wait about 2 weeks to got the code 4000, received the invoice yesterday, and got this final e-mail on today morning. Seems like my car was stuck on QC for two weeks.
#563
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
me too 1/24 and I wonder why these other cars are going 3300 and we’re not. Some have the Q91 wheels and are getting accepted.
#564
Instructor
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
There are a lot of people with Jan allocation and Q9I stuck in limbo and I assume as soon as a set arrives they immediately match them the next person in line and they go to 3300.
The following users liked this post:
TKirby1332 (03-28-2023)
#566
Instructor
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Well I gave my c7 to my daughter today. Hope my c8 comes within the next month but I'm not holding my breath. Been at 3000 for almost 6 weeks now.
#567
Intermediate
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Yes, had the Q9I wheels on my order... appears those of us from Jan with them are finally getting TPWs.
#568
#569
#571
The following users liked this post:
TKirby1332 (04-04-2023)
#572
Instructor
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
The following 2 users liked this post by _ThereIsNoSpoon_:
Aaron Rittenhouse (03-31-2023),
Marcho Polo (03-29-2023)
#573
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
The following users liked this post:
TKirby1332 (03-31-2023)
#574
Racer
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
Member Since: Feb 2000
Location: Conesus NY
Posts: 421
Received 110 Likes
on
51 Posts
Cruise-In I Veteran
![](https://www.corvetteforum.com/forums/images/ranks/cf20.jpg)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Getting close. My number is 28866. If production holds up, it should be built late Monday. Museum delivery is still set for 4/26. They have been cranking them through the Museum. 6-8 per day for the last week or so.
#575
Instructor
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Lucky you, that's the date I wanted. Right before the Bash and it's my birthday. But not complaining that I'm getting the car sooner.
The following users liked this post:
ckrueger (03-30-2023)
#576
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
My car is being built tomorrow March 30th and will finish up first shift Friday morning.since I only live 50 miles from Bowling Green so I'm going to drive over and do a plant tour tomorrow afternoon. Maybe I will get lucky and see my car being put together.
. My musuem pick up date is Friday April 14th. I can't wait till I get it home here in Gallatin TN.
. My musuem pick up date is Friday April 14th. I can't wait till I get it home here in Gallatin TN.
The following users liked this post:
ckrueger (03-30-2023)
#578
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Since my car was set to be built today March 30 and 31 I scheduled a plant tour for March 30 late in the afternoon. We did not see my car on the tour but after the tour was over the tour guide said let's see if we can find your car. He obtained the build sequence number by using my order number. We found the car not quite half way through the build cycle. He stayed with me for about 50 minutes and I got to see the engine heat Shields installed and the two fuel tanks installed. The highlight was watching the marriage of the car frame to the engine / transaxle and brakes along with the front suspension. My hats off to the tour guide to take the time to find my car and let me watch the 50 minutes of it's build.
The following 4 users liked this post by Twinjett:
Aaron Rittenhouse (03-31-2023),
ckrueger (03-31-2023),
jcchevy (04-01-2023),
TKirby1332 (03-31-2023)
#580
Racer
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
Member Since: Feb 2000
Location: Conesus NY
Posts: 421
Received 110 Likes
on
51 Posts
Cruise-In I Veteran
![](https://www.corvetteforum.com/forums/images/ranks/cf20.jpg)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
Since my car was set to be built today March 30 and 31 I scheduled a plant tour for March 30 late in the afternoon. We did not see my car on the tour but after the tour was over the tour guide said let's see if we can find your car. He obtained the build sequence number by using my order number. We found the car not quite half way through the build cycle. He stayed with me for about 50 minutes and I got to see the engine heat Shields installed and the two fuel tanks installed. The highlight was watching the marriage of the car frame to the engine / transaxle and brakes along with the front suspension. My hats off to the tour guide to take the time to find my car and let me watch the 50 minutes of it's build.