Key Fob Programming
Thread Starter
Instructor
Joined: Jul 2021
Posts: 172
Likes: 16
Key Fob Programming
Bought a third Key Fob. Someone had a link as to how to program a third fob but I cant find it. Any chance someone has the procedure handy so I can print it to do what needs to be done to program a third FOB Thanks
Race Director
Joined: Aug 2016
Posts: 12,868
Likes: 10,277
From: Garden Valley CA
It's in the owner's manual:
Programming with Recognized
Remote Keys
A new key can be programmed to
the vehicle when there are two
recognized keys.
To program, the vehicle must be in
run and all remote keys, both
currently recognized and new, must
be with you.
1. Place the two recognized
remote keys on the
passenger seat.
2. Scroll to the DIC menu to
"Remote Key Learn" menu and
select.
The DIC displays READY FOR
REMOTE #3, 4, 5, ETC.
3. Place the new remote key into
the backup pocket location.
4. Press ENGINE START/STOP.
When the remote key is
learned, the DIC display will
show that it is ready to program
the next remote key.
5. Remove the remote key from
the backup location and press
K or Q on the remote key.
To program additional remote
keys, repeat Steps 3–5.
When all additional remote
keys are programmed, press
and hold ENGINE START/
STOP for approximately
12 seconds to exit
programming mode.
Programming with Recognized
Remote Keys
A new key can be programmed to
the vehicle when there are two
recognized keys.
To program, the vehicle must be in
run and all remote keys, both
currently recognized and new, must
be with you.
1. Place the two recognized
remote keys on the
passenger seat.
2. Scroll to the DIC menu to
"Remote Key Learn" menu and
select.
The DIC displays READY FOR
REMOTE #3, 4, 5, ETC.
3. Place the new remote key into
the backup pocket location.
4. Press ENGINE START/STOP.
When the remote key is
learned, the DIC display will
show that it is ready to program
the next remote key.
5. Remove the remote key from
the backup location and press
K or Q on the remote key.
To program additional remote
keys, repeat Steps 3–5.
When all additional remote
keys are programmed, press
and hold ENGINE START/
STOP for approximately
12 seconds to exit
programming mode.
