Please identify your self.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Melting Slicks
Joined: May 2021
Posts: 2,562
Likes: 1,579
I had to lookup "macksauce"... (you kids today and your hax0r sl4ng...), but not sure that is the proper use of "macksauce"...lolz!
This guy is going to have a hard time explaining this to the rental company.
Imagine if the damage is beyond just the control arm and the chassis attachment points. Those bedford castings are aluminum.
This guy is going to have a hard time explaining this to the rental company.
Imagine if the damage is beyond just the control arm and the chassis attachment points. Those bedford castings are aluminum.
Drifting
Joined: Apr 2021
Posts: 1,911
Likes: 2,568
From: Chicago-ish
I had to lookup "macksauce"... (you kids today and your hax0r sl4ng...), but not sure that is the proper use of "macksauce"...lolz!
This guy is going to have a hard time explaining this to the rental company.
Imagine if the damage is beyond just the control arm and the chassis attachment points. Those bedford castings are aluminum.
This guy is going to have a hard time explaining this to the rental company.
Imagine if the damage is beyond just the control arm and the chassis attachment points. Those bedford castings are aluminum.
Definitely the proper use. Though it’s most often used for people that suck at cutting up on busy expressways, it’s still used aplenty for people who smack light poles and curbs trying to do donuts.
Man though, I can’t even begin to imagine how much that damage will cost to fix if and when parts ever become available. Maybe it’ll end up in a salvage auction for anyone mechanically inclined.
Le Mans Master
Joined: Apr 2018
Posts: 5,812
Likes: 8,303
From: Dove Mountain, AZ
2023 C8 of the Year Finalist - Unmodified
Le Mans Master
Joined: Sep 2017
Posts: 5,767
Likes: 2,967
From: Rural NW Georgia. GO DAWGS!
2024 C8 of the Year Finalist - Unmodified
https://www.instagram.com/team_macksauce/?hl=en
Definitely the proper use. Though it’s most often used for people that suck at cutting up on busy expressways, it’s still used aplenty for people who smack light poles and curbs trying to do donuts.
Man though, I can’t even begin to imagine how much that damage will cost to fix if and when parts ever become available. Maybe it’ll end up in a salvage auction for anyone mechanically inclined.
Definitely the proper use. Though it’s most often used for people that suck at cutting up on busy expressways, it’s still used aplenty for people who smack light poles and curbs trying to do donuts.
Man though, I can’t even begin to imagine how much that damage will cost to fix if and when parts ever become available. Maybe it’ll end up in a salvage auction for anyone mechanically inclined.
Yes - I looked it up too. I never miss an opportunity to learn something new.
Melting Slicks
Joined: Jan 2006
Posts: 2,299
Likes: 1,860
From: Oregon
I get offended when the local news calls it Street Racing, and it is just a takeover of an intersection and burning rubber.
There is no racing involved, just burning rubber.
Either was, it was worth watching for the "Don't do this" value.