Comments
Thread Starter
Instructor
Joined: Dec 2020
Posts: 213
Likes: 96
From: northville mi
Comments
I thought that this sight was designed to help fellow vette owners resolve issues. Why is it that so many of the responses are inappropriate or from "Corvette wanta bees ." Looks like it is time to find a more appropriate source for answers
Popular Reply
Sep 30, 2024, 12:29 PM
Melting Slicks
Joined: Nov 2007
Posts: 2,278
Likes: 550
From: Pittsburgh PA
St. Jude Donor '10-'11-'12-'13-'14
There's lots of good answers and info here. But it's a public internet forum - to get value from it you have to be willing to scroll through the posts of no interest/relevance.
Melting Slicks
Joined: Nov 2007
Posts: 2,278
Likes: 550
From: Pittsburgh PA
St. Jude Donor '10-'11-'12-'13-'14
There's lots of good answers and info here. But it's a public internet forum - to get value from it you have to be willing to scroll through the posts of no interest/relevance.
Racer
Joined: Jun 2010
Posts: 355
Likes: 202
From: TEXAS
I’m not seeing what you’re seeing
What’s happening that’s unacceptable here?
Race Director
Joined: Jan 2014
Posts: 10,709
Likes: 7,101
From: Fulshear, TX
Racer
Joined: Jun 2010
Posts: 355
Likes: 202
From: TEXAS
......and to be clear, I am only on my second Corvette, and I will freely admit that I have a learning curve. THATS why I like this site because I can get up to speed.
I intentionally dont post or flame anyone that likes things different.
I dont prefer high wings. I dont prefer ghetto stuff. I dont prefer neon paint and LEDs that shine on the ground while driving.
BUT I respect others and dont bother posting in their threads and just overall try to be an encouragement to others because life is short and being a keyboard commando is for underachieving man-boys that would NEVER in a MILLION years be physically confrontational with another man, yet encouraging others is if benefit to you as well as the other person, and I'd rather wear a smile than tear people down
Pro
Joined: Sep 2012
Posts: 530
Likes: 164
From: Central East Florida
Like many of us, I have been part of several forums over the years. This is by far the most informative of any of them. Recently I have seen the same thing. It is a shame, but it is a small part of the group. Just take the good and ignore the bad.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Instructor
Joined: Feb 2021
Posts: 130
Likes: 87
From: Alabama
Moderator
Joined: Feb 2006
Posts: 39,064
Likes: 17,930
From: DFW Area TX
Complaints, Suggestions & Questions
If you have suggestions for the improvement of the Forum, questions or criticism of the Forum or its moderation, you are welcome to PM or e-mail a moderator. Please do not use an open thread for such messages, however.
That would include, but is not limited to discussions about who has been banned and why.
The work on the Forum's volunteer moderators is difficult enough without having folks calling them out in open threads.
If you have suggestions for the improvement of the Forum, questions or criticism of the Forum or its moderation, you are welcome to PM or e-mail a moderator. Please do not use an open thread for such messages, however.
That would include, but is not limited to discussions about who has been banned and why.
The work on the Forum's volunteer moderators is difficult enough without having folks calling them out in open threads.