configuring the dashboard
Thread Starter
Intermediate
Joined: Mar 2024
Posts: 37
Likes: 29
From: Ohioville, PA
configuring the dashboard
I have read through the manual and either I'm an idiot (and that may be true) or the manual is not clear on how to configure the dash layout. What I would like to do is set up the sport layout to have the circular tachometer with the tire pressures on the right and the engine parameters on the left as on the track layout. Or, to put it another way, the track layout but with the circular tach display of the sport layout. Is this possible, and if so, how do I do it?
This is on a 2026 with the new dashboard.
This is on a 2026 with the new dashboard.
Burning Brakes
Joined: Jan 2011
Posts: 978
Likes: 245
From: San Jose CA
I have read through the manual and either I'm an idiot (and that may be true) or the manual is not clear on how to configure the dash layout. What I would like to do is set up the sport layout to have the circular tachometer with the tire pressures on the right and the engine parameters on the left as on the track layout. Or, to put it another way, the track layout but with the circular tach display of the sport layout. Is this possible, and if so, how do I do it?
This is on a 2026 with the new dashboard.
This is on a 2026 with the new dashboard.
Navigator
Joined: Mar 2023
Posts: 9
Likes: 2
From: Northwest IN
I:ve tried for same look.. No success. So Keep Sport mode on hud and have gone to track mode on the dash Previous Z(2023) you could get trip info, tire pressure and engine temp and oil pressure with round tach. Cannot do on a 26 At least I can't seem to do it
