spring mod pics
Thread Starter
Racer
Joined: Jan 2007
Posts: 380
Likes: 7
From: SW Ontario
spring mod pics
Well as we all know it's been a long a cold winter. My spare room in the basement was getting full of parts collected over the winter months. Finally got them back from the body shop and onto the car
Sorry about the photo quality, I got home too late from work tonight to get any outside / sunlight shots and I was too excited to wait for the next sunshine blast
More mods on the way over the next 3-4 weeks :
Optima red top
LS6 intake
new plugs
MSD wires
160 deg t state
HID headlights
LG headers
Elite 3/8"tunnel plate
Dyno tune
Z06 brake ducts ( functional)
that should be it for this year....bank account is officially empty
Enjoy the pics so far...
New shoes 19/20's c6 motorsport with toyo proxies
Painted hoop black, for that slight contrast
added the newly retooled ACS mini rear spoiler ( ABS material, not the f glass one)
Also installed the rear exhaust valence
let me know your thoughts
thx
Corey
Sorry about the photo quality, I got home too late from work tonight to get any outside / sunlight shots and I was too excited to wait for the next sunshine blast
More mods on the way over the next 3-4 weeks :
Optima red top
LS6 intake
new plugs
MSD wires
160 deg t state
HID headlights
LG headers
Elite 3/8"tunnel plate
Dyno tune
Z06 brake ducts ( functional)
that should be it for this year....bank account is officially empty
Enjoy the pics so far...
New shoes 19/20's c6 motorsport with toyo proxies
Painted hoop black, for that slight contrast
added the newly retooled ACS mini rear spoiler ( ABS material, not the f glass one)
Also installed the rear exhaust valence
let me know your thoughts
thx
Corey
Thread Starter
Racer
Joined: Jan 2007
Posts: 380
Likes: 7
From: SW Ontario
Peter I agree the toyo seem really grippy and the ride is actually better than the run flats, which were 10 yrs old. I was afraid going to the 19/20 combo would be horrible with our roads. I did the tire dressing for the 1st time since they have been on the car, and with that low of a side wall, that little applicator will last 5 years 
Thread Starter
Racer
Joined: Jan 2007
Posts: 380
Likes: 7
From: SW Ontario
The car is lowered 1"...just can't tell from my picture angle.
Once i get some better side / outdoor shots i will post soon.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Jan 2007
Posts: 380
Likes: 7
From: SW Ontario
Thanks for the replys guys !!!
The rotors, are aftermarket, drilled and zinc plated. I picked up in Toronto last summer for about $300 +/- They are factory size, only have about 2k worth of driving on them, so far so good.
Race Director
Joined: Apr 2000
Posts: 17,676
Likes: 201
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
Lookin' 
I have the Toyo T1R's and was very impressed with how nice and smooth the ride is, actually better than the old tires which had a much bigger sidewall I too thought I'd be in for a filling jarring ride but was pleasantly surprised
I have the Toyo T1R's and was very impressed with how nice and smooth the ride is, actually better than the old tires which had a much bigger sidewall I too thought I'd be in for a filling jarring ride but was pleasantly surprised