Parts For Sale (Canadian Events)
#2123
Burning Brakes
I will be in Toronto next week and could deliver within reason! Wheels are located in Ottawa.
Aloha Corvette Forum! I doubt these wheels need much of an introduction or explanation. These are what everyone wants: light, strong, 3-piece forged wheels. I have turned my attention to my MKIV Supra, and it looks less and less like I will use these are I once thought I would.
These wheels are tough to find and don't surface very often. These were built for a C6 base (narrowbody) Corvette. I have added some high-quality pictures so that you know exactly what you are purchasing. These wheels are structurally in excellent condition.
I've owned many wheels, and these are by far the cleanest set I have had. While they are used, they are in immaculate condition: no marks on any of the hardware (still have factory orange markings on bolts), the faces are perfect, the lug nut holes are in fantastic condition (great care taken when mounting them. I have searched to find issues and there is one blemish on the outer hoop that is very small.
For all intents and purposes, these wheels are [basically] new.
The wheels do have a set of Pilot Sport Cup tires mounted and will be included with the purchase. They are old. They are hard. They should not be used.
I'm happy to ship them so long as you can wait a week or two since I work an exorbitant amount of hours.
2x 18x10 +57 | Front
F730A602010730526
F730A602010730527
2x 18x11 +79 | Rear
F730A602010730525
F730A602010730528
4x Fikse Center Caps
Asking $2,950 CAD plus actual shipping.
Aloha Corvette Forum! I doubt these wheels need much of an introduction or explanation. These are what everyone wants: light, strong, 3-piece forged wheels. I have turned my attention to my MKIV Supra, and it looks less and less like I will use these are I once thought I would.
These wheels are tough to find and don't surface very often. These were built for a C6 base (narrowbody) Corvette. I have added some high-quality pictures so that you know exactly what you are purchasing. These wheels are structurally in excellent condition.
I've owned many wheels, and these are by far the cleanest set I have had. While they are used, they are in immaculate condition: no marks on any of the hardware (still have factory orange markings on bolts), the faces are perfect, the lug nut holes are in fantastic condition (great care taken when mounting them. I have searched to find issues and there is one blemish on the outer hoop that is very small.
For all intents and purposes, these wheels are [basically] new.
The wheels do have a set of Pilot Sport Cup tires mounted and will be included with the purchase. They are old. They are hard. They should not be used.
I'm happy to ship them so long as you can wait a week or two since I work an exorbitant amount of hours.
2x 18x10 +57 | Front
F730A602010730526
F730A602010730527
2x 18x11 +79 | Rear
F730A602010730525
F730A602010730528
4x Fikse Center Caps
Asking $2,950 CAD plus actual shipping.
Last edited by SVTBAIT; 10-26-2017 at 05:09 PM.
#2124
Cold weather is upon us, and just wanted to let everyone know that this winter tire package is still available, so if you're interested please PM me your offers.
Hey Everyone,
I have a FULL SET of winter tires mounted on steel wheels FOR SALE, which came off my Chevy Cruze.
They were purchased November 2015 and used for only two winters (2015/16 & 2016/17) both mild winters, and the set is in excellent condition.
I'm in the southern York Region area and would like to sell to GTA member if possible, just easier to do transaction in person.
Product Information:
Tires: Toyo Observe G3-ICE 215/60R-16
http://www.toyotires.ca/tire/pattern/observe-g3-ice
Wheels: 16 x 6.5 5-105mm (hole diameter: diameters of wheel holes can be googled by make and model in case you're not sure of your vehicle's size; type: "my bolt pattern")
------------------------------------------------------------------
Full Set Retail Value (including taxes were $900 as per MY invoice)
Reson for Sale: Will not fit my new daily driver.
------------------------------------------------------------------
MY PRICE: BEST PAID OFFER TAKES THE SET. (PM ME)
(C.O.D. SALES ONLY)
Frank
Here's the pictures, keep in mind that these pics were taken after washing them so not to think that the side walls are faded, they're just showing wet & dry spots.
Attachment 48203950
Attachment 48203951
Attachment 48203952
I have a FULL SET of winter tires mounted on steel wheels FOR SALE, which came off my Chevy Cruze.
They were purchased November 2015 and used for only two winters (2015/16 & 2016/17) both mild winters, and the set is in excellent condition.
I'm in the southern York Region area and would like to sell to GTA member if possible, just easier to do transaction in person.
Product Information:
Tires: Toyo Observe G3-ICE 215/60R-16
http://www.toyotires.ca/tire/pattern/observe-g3-ice
Wheels: 16 x 6.5 5-105mm (hole diameter: diameters of wheel holes can be googled by make and model in case you're not sure of your vehicle's size; type: "my bolt pattern")
------------------------------------------------------------------
Full Set Retail Value (including taxes were $900 as per MY invoice)
Reson for Sale: Will not fit my new daily driver.
------------------------------------------------------------------
MY PRICE: BEST PAID OFFER TAKES THE SET. (PM ME)
(C.O.D. SALES ONLY)
Frank
Here's the pictures, keep in mind that these pics were taken after washing them so not to think that the side walls are faded, they're just showing wet & dry spots.
Attachment 48203950
Attachment 48203951
Attachment 48203952
#2126
Melting Slicks
Tire pressure sensors 2010-2013
I have 4 new, AC Delco tire pressure sensors for 2010-2013 year Corvettes. Part # 20925924. $195.
https://www.corvetteforum.com/forums...attach/jpg.gif
https://www.corvetteforum.com/forums...attach/jpg.gif
#2129
Melting Slicks
HI....I'm selling my pristine set of black Cray brickyards that come mounted on Michelin Pilot Super Sport ZP in the following sizes 19x10 (285/35/19) and 20x12 (335/25/20).
These wheels have only been used for 2 short seasons and they have roughly 4000 kms on them. The tires still have the stubs showing on them.
No burn outs and no track driving on them. Virtually brand new. I'm listing them for $4400. These wheels are immaculate and have no curb damage.
They are rotary forged and are light. They really take the wide body C6 and C7 to another level. Wheels have a concave look to them and are very aggressive.
I have previously sold a set to member HiVoltge and I'm sure he can vouch for me as a seller.
I can submit pictures as requested. Thanks.
These wheels have only been used for 2 short seasons and they have roughly 4000 kms on them. The tires still have the stubs showing on them.
No burn outs and no track driving on them. Virtually brand new. I'm listing them for $4400. These wheels are immaculate and have no curb damage.
They are rotary forged and are light. They really take the wide body C6 and C7 to another level. Wheels have a concave look to them and are very aggressive.
I have previously sold a set to member HiVoltge and I'm sure he can vouch for me as a seller.
I can submit pictures as requested. Thanks.
Yes I still have those CCW's on my vette
#2130
Le Mans Master
FS: Borla x pipe
Thinking of selling my X pipe for C7. if any interest.
C7 Corvette Stingray 2014-2018 X-Pipe part # 60547
This X-pipe eliminates the secondary cats. It will bolt into the factory location and will work with both the OE mufflers and Borla mufflers.
Perfect condition, no marks or dents.
$450.
C7 Corvette Stingray 2014-2018 X-Pipe part # 60547
This X-pipe eliminates the secondary cats. It will bolt into the factory location and will work with both the OE mufflers and Borla mufflers.
Perfect condition, no marks or dents.
$450.
Last edited by walleyejack; 11-09-2017 at 07:30 PM.
#2131
Burning Brakes
2 sets of C5/C6 front and rear used brake pads
I have two sets of OEM GM C5/C6 used brake pads for sale:
One set of C5/C6 set of ceramic brake pads off my 1998 C5. Average thickness is .52 inches. Asking $60.CAD
One set of C5/C6 set of (non) ceramic brake pads off my 1998 C5. Average thickness is .50 inches. Asking $60.CAD
One set of C5/C6 set of ceramic brake pads off my 1998 C5. Average thickness is .52 inches. Asking $60.CAD
One set of C5/C6 set of (non) ceramic brake pads off my 1998 C5. Average thickness is .50 inches. Asking $60.CAD
#2133
Le Mans Master
[quote=walleyejack;1595934038] selling my x pipe for c7.
C7 corvette stingray 2014-2018 Borla x-pipe part # 60547
this x-pipe eliminates the secondary cats. It will bolt into the factory location and will work with both the oe mufflers and borla mufflers.
Perfect condition, no marks or dents.
$450.
$425.
No dents
Either side
Last edited by walleyejack; 11-27-2017 at 08:30 AM.
#2134
Advanced
Enkei NT03+M wheels/tires for C6 Z51
These were used on a 2005 Corvette Z51, but I'm sure fit many other years. I would assume anything between 05 and 13, but please check fitment for yourself.
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
Last edited by G-ForceJunkie; 11-18-2017 at 10:09 AM.
#2135
LG Street Series Headers & X-Pipe from 03 C5 Z06
LG Street Series Complete exhaust with hi-flow cats and air fittings - off a 2003 Z06. No dents or damage, come with all clamps needed.
*SOLD*
*SOLD*
Last edited by Mikes-Z06; 11-20-2017 at 09:00 PM.
#2136
Some parts are negotiable and some are not, if you buy a bunch of parts I can make a package deal. All prices are in USD $
Items are all getting shipped from Canada (Quebec) and shipping is extra $, Ill cover half of shipping cost if order is more than 2000$. I take cash or paypal, buyer pays paypal fees (transfer money as GIFT). Im willing to meet somebody at the border of Vermont/Maine/New Hamphire if you want to come and pick it up. I have pics of all the parts, its just too many to post all of them here so if you're interested Ill send you some, you can reach me either by PM or txt @ 819-4three2-0034
All parts come off a 2002 c5z
- 2800$ C6Z T56 tranny + 3.42 diff (I can get the whole c6z rear cradle if you need it for a swap, with shafts, tabs, hubs suspension and everything for a complete c6z swap into a c5 for extra $$)
- 2800$ A&A Vortech v2 S-trim S/C kit, it comes with 3.4" and 3.12" pulleys, brand new green stripe strap, all the piping was redone, now its all hard piping (was tired of popping), BOV was relocated now its between the intercooler and TB, piping is pre-drilled for IAT sensor (if you decide to go SD Tune) and meth kit, everything is placed exactly where it should be if you run meth, the kit is missing one rubber coupler(15$), BOV (200$) oil feed and drain line(50$), doesnt come with injectors and the intercooler has a dent on the side thats not noticeable when on the car and it doesnt affect the performance at all, it doesnt leak or anything.
- 1700$ C5Z T56 TRANNY + 3.42SP DIFF, all sensors need to be replaced on tranny and diff, you can swap yours if you have a t56, apart from that everything else worked fine before the accident and just to be sure I sent both to the shop to get them opened up and verified and they confirmed that everything inside is fine, while being there they changed both shaft seals on the diff so thats brand new (100$).
- 1100$ Borla LongTube headers 1 3/4" + x pipe no cats with both o2 sensors, a few dents from the install otherwise they have around 4000miles on them
- SOLD 243 Heads cathedral port LS6 cleaned, resurfaced, pressure tested, valves lapped, comes with rockers, btr platinum .660 dual springs w/ titanium retainers, straub tech bushing trunion kit w/ bolts, sodium filled valves, everything has 1000miles, they look like brand new
- 1000$ ACT twin disc 975tq clutch only 2000miles, very smooth, held 700whp without any issues
- 800$ LS6 shortblock can confirm it worked #1 in the car not too long ago, comes with oilpan + front cover + valley cover..no cam & oil pump/chain
- 600$ LS6 shortblock without oilpan, front cover, cam and oil pump, comes with valley cover
- 650$ c5z OEM wheels & tires (17/18), 2 front tires 90% thread left and 2 with 20% left, 1 wheel has curb rash, not willing to split them
- 400$ c5z complete torque tube, opened it up and bushings are #1 condition, have pics
- 350$ BTR/CCP Arun JamCam 230/242 115+4 .608"/.615" only has 1000miles
- 300$ c5z 2002 PCM
- 200$ Stock c5 z06 H-pipe with manifolds & cats
- 150$ c5 Front right both tabs with balljoints, hub, abs sensor, etc
- 150$ c5 A/c compressor
- 150$ c5 Front right headlight+motor+module+support
- 150$ GM almost new clutch slave cylinder only 2000miles
- SOLD SummitRacing 7.5" harmonic balancer 1000miles
- 100$ 2x LS6 Valve covers with gaskets & bolts
- 100$ Aluminum CAI with two brand new k&n filters
- 100$ Compcam LS rocker bearing trunion kit
- 100$ C5 Starter
- 80$ C6Z seat track + motor + module
- 80$ Front right c5z piston+caliper
- 70$ 2004+ reinforced P/S bracket (needed if you have 97-03 c5 and plan on installing a S/C)
- 80$ c5z Bell Housing
- SOLD BTR Pushrods 7.4" .080 5/16" CHROMOLY
- SOLD LS2 GM performance timing chain (fits in a ls1 or ls6)
- SOLD GM performance high volume oil pump
- 50$ Akata 15MM rear wheel spacers
- 30$ LS6 Stock lifters
- 40$ 160F A&A thermostat
- SOLD ARP Damper bolt and washer
- 40$ 1x siemens-deka 60lb injector
- 60$ Wideband Innovate sensor
- 40$ Stock c5 taillights
- 40$ a&a brand new early style air filter little esthetic damage but nothing huge, never installed
- 30$ stock ls6 pushrods
- 15$ c5 shorty antenna about 8" long
- 40$ stock ls6 28lb@58psi injectors
- 40$ left side c5 foglight
- 50$ stock air tube from throttle body to the air box, comes with MAF sensor, no air box
- 50$ innovators west crank pin kit
- 25$ 9/16" Rotobrach drill to tap the oil pan for oil drain line
- 30$ stock ls6 flywheel
Items are all getting shipped from Canada (Quebec) and shipping is extra $, Ill cover half of shipping cost if order is more than 2000$. I take cash or paypal, buyer pays paypal fees (transfer money as GIFT). Im willing to meet somebody at the border of Vermont/Maine/New Hamphire if you want to come and pick it up. I have pics of all the parts, its just too many to post all of them here so if you're interested Ill send you some, you can reach me either by PM or txt @ 819-4three2-0034
All parts come off a 2002 c5z
- 2800$ C6Z T56 tranny + 3.42 diff (I can get the whole c6z rear cradle if you need it for a swap, with shafts, tabs, hubs suspension and everything for a complete c6z swap into a c5 for extra $$)
- 2800$ A&A Vortech v2 S-trim S/C kit, it comes with 3.4" and 3.12" pulleys, brand new green stripe strap, all the piping was redone, now its all hard piping (was tired of popping), BOV was relocated now its between the intercooler and TB, piping is pre-drilled for IAT sensor (if you decide to go SD Tune) and meth kit, everything is placed exactly where it should be if you run meth, the kit is missing one rubber coupler(15$), BOV (200$) oil feed and drain line(50$), doesnt come with injectors and the intercooler has a dent on the side thats not noticeable when on the car and it doesnt affect the performance at all, it doesnt leak or anything.
- 1700$ C5Z T56 TRANNY + 3.42SP DIFF, all sensors need to be replaced on tranny and diff, you can swap yours if you have a t56, apart from that everything else worked fine before the accident and just to be sure I sent both to the shop to get them opened up and verified and they confirmed that everything inside is fine, while being there they changed both shaft seals on the diff so thats brand new (100$).
- 1100$ Borla LongTube headers 1 3/4" + x pipe no cats with both o2 sensors, a few dents from the install otherwise they have around 4000miles on them
- SOLD 243 Heads cathedral port LS6 cleaned, resurfaced, pressure tested, valves lapped, comes with rockers, btr platinum .660 dual springs w/ titanium retainers, straub tech bushing trunion kit w/ bolts, sodium filled valves, everything has 1000miles, they look like brand new
- 1000$ ACT twin disc 975tq clutch only 2000miles, very smooth, held 700whp without any issues
- 800$ LS6 shortblock can confirm it worked #1 in the car not too long ago, comes with oilpan + front cover + valley cover..no cam & oil pump/chain
- 600$ LS6 shortblock without oilpan, front cover, cam and oil pump, comes with valley cover
- 650$ c5z OEM wheels & tires (17/18), 2 front tires 90% thread left and 2 with 20% left, 1 wheel has curb rash, not willing to split them
- 400$ c5z complete torque tube, opened it up and bushings are #1 condition, have pics
- 350$ BTR/CCP Arun JamCam 230/242 115+4 .608"/.615" only has 1000miles
- 300$ c5z 2002 PCM
- 200$ Stock c5 z06 H-pipe with manifolds & cats
- 150$ c5 Front right both tabs with balljoints, hub, abs sensor, etc
- 150$ c5 A/c compressor
- 150$ c5 Front right headlight+motor+module+support
- 150$ GM almost new clutch slave cylinder only 2000miles
- SOLD SummitRacing 7.5" harmonic balancer 1000miles
- 100$ 2x LS6 Valve covers with gaskets & bolts
- 100$ Aluminum CAI with two brand new k&n filters
- 100$ Compcam LS rocker bearing trunion kit
- 100$ C5 Starter
- 80$ C6Z seat track + motor + module
- 80$ Front right c5z piston+caliper
- 70$ 2004+ reinforced P/S bracket (needed if you have 97-03 c5 and plan on installing a S/C)
- 80$ c5z Bell Housing
- SOLD BTR Pushrods 7.4" .080 5/16" CHROMOLY
- SOLD LS2 GM performance timing chain (fits in a ls1 or ls6)
- SOLD GM performance high volume oil pump
- 50$ Akata 15MM rear wheel spacers
- 30$ LS6 Stock lifters
- 40$ 160F A&A thermostat
- SOLD ARP Damper bolt and washer
- 40$ 1x siemens-deka 60lb injector
- 60$ Wideband Innovate sensor
- 40$ Stock c5 taillights
- 40$ a&a brand new early style air filter little esthetic damage but nothing huge, never installed
- 30$ stock ls6 pushrods
- 15$ c5 shorty antenna about 8" long
- 40$ stock ls6 28lb@58psi injectors
- 40$ left side c5 foglight
- 50$ stock air tube from throttle body to the air box, comes with MAF sensor, no air box
- 50$ innovators west crank pin kit
- 25$ 9/16" Rotobrach drill to tap the oil pan for oil drain line
- 30$ stock ls6 flywheel
Last edited by Mrcho; 11-22-2017 at 01:17 PM.
#2137
Advanced
All the rotors/pads you need to get a C6 Z51 Corvette ready for the road course.
Please see ad on kijiji:
https://www.kijiji.ca/v-view-details...Activated=true
$300 Or Best Offer. Please PM or message me through kijiji. Parts are currently located in Bruce county, but can be brought to Barrie Ontario area.
Please see ad on kijiji:
https://www.kijiji.ca/v-view-details...Activated=true
$300 Or Best Offer. Please PM or message me through kijiji. Parts are currently located in Bruce county, but can be brought to Barrie Ontario area.
#2138
Le Mans Master
C7 corvette stingray 2014-2018 Borla x-pipe part # 60547
this x-pipe eliminates the secondary cats. It will bolt into the factory location and will work with both the oe mufflers and borla mufflers.
Perfect condition, no marks or dents.
$425.
No dents
this x-pipe eliminates the secondary cats. It will bolt into the factory location and will work with both the oe mufflers and borla mufflers.
Perfect condition, no marks or dents.
$425.
No dents
#2139
Melting Slicks
HI....I'm selling my pristine set of black Cray brickyards that come mounted on Michelin Pilot Super Sport ZP in the following sizes 19x10 (285/35/19) and 20x12 (335/25/20).
These wheels have only been used for 2 short seasons and they have roughly 4000 kms on them. The tires still have the stubs showing on them.
No burn outs and no track driving on them. Virtually brand new. I'm listing them for $3400. These wheels are immaculate and have no curb damage.
They are rotary forged and are light. They really take the wide body C6 and C7 to another level. Wheels have a concave look to them and are very aggressive.
I have previously sold a set to member HiVoltge and I'm sure he can vouch for me as a seller.
I can submit pictures as requested. Thanks.
These wheels have only been used for 2 short seasons and they have roughly 4000 kms on them. The tires still have the stubs showing on them.
No burn outs and no track driving on them. Virtually brand new. I'm listing them for $3400. These wheels are immaculate and have no curb damage.
They are rotary forged and are light. They really take the wide body C6 and C7 to another level. Wheels have a concave look to them and are very aggressive.
I have previously sold a set to member HiVoltge and I'm sure he can vouch for me as a seller.
I can submit pictures as requested. Thanks.