When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wondering what you guys used to dry your cars? I usually use an absorber but have heard of people using a large microfiber towel. Also, if ya'll use the microfiber, how do you wash it correctly? Thanks
What you want is waffle weave (ww) MF towels for drying.
Wash all your MF together but seperate from anything else. Hot water w/ liguid tide or micro restore. After the wash cycle is complete, do the rinse cycle again but add a few capfulls of vinegar. Dry on low heat and never use any fabric softner with MF.
What you want is waffle weave (ww) MF towels for drying.
Wash all your MF together but seperate from anything else. Hot water w/ liguid tide or micro restore. After the wash cycle is complete, do the rinse cycle again but add a few capfulls of vinegar. Dry on low heat and never use any fabric softner with MF.
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2023 C3 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist Unmodified
2020 Corvette of the Year Finalist (performance mods)
2019 C1 of Year Winner (performance mods)
2017 Corvette of the Year Finalist
2016 C2 of Year
2015 C3 of Year Finalist
I like to "sheet" the water over the car and finish with a waffle weave. After sheeting there is very little left to dry unless the car has no protection. In that event a leaf blower followed by a waffle weave works well.