almost ran out!
Thread Starter
Melting Slicks
Joined: Apr 2004
Posts: 3,287
Likes: 7
From: n/a SC
almost ran out!
Well I did the 303 top protectant today you probably saw where I had a question about it not removing a few black dots on my top well anyway when I went to put the protectant on I get towards the rear of the top and 
I'm nearly out of protectant! I didn't OVER do it either just enough to where the treated area was slightly darkend. At the vey rear of the top it didn't get a good coat on it at all. Also I masked off the car good but one bit of this stuff goes straight through news paper and is hell to get off your windows!
with all the technology looks like raggtop and 303 could have a product that wouldn't eat away rubber and be hell to get off your glass and finish if you get some on it by mistake. (also like another guy said the sprayer sucks after u use half the bottle)
I'm nearly out of protectant! I didn't OVER do it either just enough to where the treated area was slightly darkend. At the vey rear of the top it didn't get a good coat on it at all. Also I masked off the car good but one bit of this stuff goes straight through news paper and is hell to get off your windows!with all the technology looks like raggtop and 303 could have a product that wouldn't eat away rubber and be hell to get off your glass and finish if you get some on it by mistake. (also like another guy said the sprayer sucks after u use half the bottle)
