When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking at grabbing a built 700r4 to go with my engine.
383 around 500 hp and will be adding 250 shot nitrous.
Now, if it was a dedicated drag car, I'd probably grab a powerglide or a th400, but since it will see the drag strip a few times each year, the overdrive of the 700r4 is tempting.
Who uses the 700r4 and what power are you putting through it?
**EDIT**
I also plan on grabbing a Carroll's Rod and Racecraft solid rear for it next year.
I had run a 700r4 for years. For the past 6 years, I have been running a 4l60e. It's much easier to dial in shift points with a computer. Very reliable unit. 406 cubes, 10.36@139.
I had run a 700r4 for years. For the past 6 years, I have been running a 4l60e. It's much easier to dial in shift points with a computer. Very reliable unit. 406 cubes, 10.36@139.
Like the pic you have up on the car what size rims and all info on the tires you are running.. Robert
Thanks Robert. 15X10 Welds with 15x11.5 MT et drags. Here's another picture showing some wrinkle.
Man that has to be a fun time off the line. Its been to many years since I got air. But the vette now will pull my azz back in the seat in boost for sure... You have a nice c4 man... Robert
Man that has to be a fun time off the line. Its been to many years since I got air. But the vette now will pull my azz back in the seat in boost for sure... You have a nice c4 man... Robert