Header question?
Thread Starter
Instructor
Joined: Oct 2001
Posts: 127
Likes: 0
From: Miramar, FL
Header question?
Who makes or can make a shorty header to fit AFR angle plug heads that will exit close enough to the original side exahusts on a Midyear?
I am contemplating dropping a 383 I built several years ago into my '65 Coupe and would like to retain my side exhausts. I replaced the worn out originals with new ones from Allen's SS that are a full 2 1'2" throughout the chamber.
I realize I will have to cut and fab. the entrance as the ramshorns exit quite short. I do not want to put ungodly bends in the connection.
Most of the header manufacturers list shorty's but not for AP or AFR heads.
Thanks in advance !
I am contemplating dropping a 383 I built several years ago into my '65 Coupe and would like to retain my side exhausts. I replaced the worn out originals with new ones from Allen's SS that are a full 2 1'2" throughout the chamber.
I realize I will have to cut and fab. the entrance as the ramshorns exit quite short. I do not want to put ungodly bends in the connection.
Most of the header manufacturers list shorty's but not for AP or AFR heads.
Thanks in advance !
