DOHC Chevy crate motor ?
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 2,130
Likes: 1
From: mesa,az
DOHC Chevy crate motor ?
I'm being told that chevy will be releasing the new DOHC engine as a crate motor. that it made 469 on the dyno. what do you guys know about it.
Last edited by panchop; Jun 29, 2005 at 06:47 PM.
Race Director
Joined: Oct 2000
Posts: 15,036
Likes: 79
From: central FL, near the beach.
i'm really not interested in a 4 cyl Ecotec even if it is 469 hp(turbo)
Originally Posted by panchop
I'm being told that chevy will be releasing the new DOHC engine as a crate motor. that it made 469 on the dyno. what do you guys know about it.
Melting Slicks
Joined: Sep 2004
Posts: 3,153
Likes: 114
i don't think GM would build a 4 pot Ecotec unit that could make 400+bhp, at least not with a warranty anyway!
dont forget Mitusubishi's EVO FQ400 basicaly had a HKS forged engine! and that think cost an arm and a couple of legs!! personal, if this is true, its got to be a V6 or bigger!!!
Chris.
PS, i dout the Eco can go that high anyway!
dont forget Mitusubishi's EVO FQ400 basicaly had a HKS forged engine! and that think cost an arm and a couple of legs!! personal, if this is true, its got to be a V6 or bigger!!!
Chris.
PS, i dout the Eco can go that high anyway!
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 2,130
Likes: 1
From: mesa,az
it's called the LC3, V8, 4.4 liters , 4 valve, DOHC, Eaton supercharged , steel crank, going in the new corvette. I'm told it is a supercharged version of the premium cadalliac engine. Ok so i have looked it up. it is the northstar supercharged engine. guess it's not that new. only that it will be coming out as a crate motor.
Last edited by panchop; Jul 5, 2005 at 07:34 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Nov 2001
Posts: 1,189
Likes: 2
From: Austin TX
Originally Posted by panchop
it's called the LC3, V8, 4.4 liters , 4 valve, DOHC, Eaton supercharged , steel crank, going in the new corvette. I'm told it is a supercharged version of the premium cadalliac engine. Ok so i have looked it up. it is the northstar supercharged engine. guess it's not that new. only that it will be coming out as a crate motor.
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,063
From: altered state
St. Jude Donor '05
Originally Posted by panchop
it's called the LC3, V8, 4.4 liters , 4 valve, DOHC, Eaton supercharged , steel crank, going in the new corvette. I'm told it is a supercharged version of the premium cadalliac engine. Ok so i have looked it up. it is the northstar supercharged engine. guess it's not that new. only that it will be coming out as a crate motor.
Drifting
Joined: Nov 2003
Posts: 1,637
Likes: 2
From: Honeoye Ny
Originally Posted by USAsOnlyWay
Sounds like the perfect motor to use in a home built F1 style car 
:
:
Drifting
Joined: Jul 2002
Posts: 1,254
Likes: 1
From: Edinburgh
You guys might be interested in this V8 that some guys on this side of the pond are producing.
http://www.rst-v8.co.uk/
http://www.rst-v8.co.uk/
Drifting
Joined: Jul 2002
Posts: 1,254
Likes: 1
From: Edinburgh
Originally Posted by Baldturbofreak
Dude, 
Oh how I dream of a small displacement flat crank v-8 that spins 12,500! I Bet they get alot of $$$ for that little guy.
Oh how I dream of a small displacement flat crank v-8 that spins 12,500! I Bet they get alot of $$$ for that little guy.Did you watch the vids? That thing is going past Ferrari's and p*rches like they were trolley buses!!
Le Mans Master
Joined: Dec 2002
Posts: 5,270
Likes: 3
From: Seattle Area WA
Originally Posted by Baldturbofreak
I too have been fighting off the urge to build such a vehicle. Road drive it under the kit car laws. Maybe a bitchin sandrail type vehicle.
Drifting
Joined: Nov 2003
Posts: 1,637
Likes: 2
From: Honeoye Ny
Very nice setup indeed. I have designing a 2 seater (one in front of the other) for a year or so in solidworks. It uses a carbon wrapped /chromolyspaceframe. No body design really though, Im a machanical/electrical engineer. Not an aerodynamicist. Nothing a few weeks of Fluent's CFD software couldn't take care of, I just don't have it though. Hopefully RIT will decide to get it soon.
So far it looks like a ultima GTR is the most feasible route to automotive Nirvana.
That little screamer would be perfect for that car. Might not fly with emissions though. Hey I got an idea, marry that motor, ultima chassis, with alternative fuels like alky or propane and market the vehicle as "An ecologically responsible compact 2 seater". Wow that sounds so good Im almost believeing my own Bull sh#$
So far it looks like a ultima GTR is the most feasible route to automotive Nirvana.
That little screamer would be perfect for that car. Might not fly with emissions though. Hey I got an idea, marry that motor, ultima chassis, with alternative fuels like alky or propane and market the vehicle as "An ecologically responsible compact 2 seater". Wow that sounds so good Im almost believeing my own Bull sh#$
Le Mans Master
Joined: Jan 2002
Posts: 9,036
Likes: 13
From: Edmonton AB
Originally Posted by Graemeinvette
You guys might be interested in this V8 that some
guys on this side of the pond are producing.
http://www.rst-v8.co.uk/
guys on this side of the pond are producing.
http://www.rst-v8.co.uk/
top ends married together with a common crankcase?
.
Last edited by Slalom4me; Aug 16, 2005 at 11:41 PM.