555" build for *Bruiser*
Thread Starter
Race Director
Joined: Jan 2000
Posts: 13,022
Likes: 2,265
From: Corsicana, Tx
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
555" build for *Bruiser*
The 555" motor we built for Doug's (Snowman) C-3 AKA as Bruiser is finally hitting the stands and the net!
It's going to be a 3 part series and the first part is on the shortblock. The second part will be all about the cams and head choices and the third will be all the details on the 2 days of dyno testing.
This was truly a homebuilt motor and it survived 35+ dyno pulls!!
Take a look and be gentle on me...it's my first time to write articles like this!! Plus we need hits on the site to show folks like big nasty street motors! Article starts on page 41.
http://editions.amospublishing.com/K...&pagenum=32&f=
(I think you'll have to sign up to the Amos site. The articles will be in the Corvette Enthusiast magazine. )
Thanks,
JIM
It's going to be a 3 part series and the first part is on the shortblock. The second part will be all about the cams and head choices and the third will be all the details on the 2 days of dyno testing.
This was truly a homebuilt motor and it survived 35+ dyno pulls!!
Take a look and be gentle on me...it's my first time to write articles like this!! Plus we need hits on the site to show folks like big nasty street motors! Article starts on page 41.
http://editions.amospublishing.com/K...&pagenum=32&f=
(I think you'll have to sign up to the Amos site. The articles will be in the Corvette Enthusiast magazine. )
Thanks,
JIM
