compression test results?
Thread Starter
Le Mans Master
Joined: Dec 2006
Posts: 7,251
Likes: 16
From: Phoenix Arizona
compression test results?
with an ls1 BLOCK. What should be the compression test results be at with 11:1 heads?
should i get 180 or 200 or 220 per cylinder or ???????
thanks!
should i get 180 or 200 or 220 per cylinder or ???????
thanks!
Burning Brakes
Joined: Nov 2006
Posts: 1,102
Likes: 1
From: Portsmouth Virginia 396LT4 435RWHP/400RWTQ Best so far 11.26 @ 123mph
Cylinder pressure will vary depending on the size camshaft used.Less overlap increases pressure. More reduces pressure. It's based on duration and LSA of the cam. For instance, my cylinder pressure varied about 10psi with a camshaft change of only 6 degrees of duration on the same LSA on a 10.8 CR. Cranking pressure went from 214 to 205. I'm guessing with a reasonable and suitable cam for your 11.1 engine, you should probably see any where from 200 to 230.
Rick
Rick
