roller rocker question?????
Thread Starter
Drifting
Joined: May 2001
Posts: 1,392
Likes: 0
From: Wabash,IN
CI 7-8-9-10 Veteran
St. Jude Donor '08
roller rocker question?????
i have a cam that is 477-480 lift and it has 1.5's.If i change these to 1.6 what lift would i have and would this give any more performance ???
thanks jay :confused:
thanks jay :confused:
Drifting
Joined: May 2001
Posts: 1,630
Likes: 0
From: Brandywine, Chester and Ridley Valleys Pennsylvania
Re: roller rocker question????? (jparr)
.477"/1.5= .318" .318"*1.6=.509"
It probably would add some power, assuming your manifold/heads have some "breathing room" and aren't currentlly maxxed out (with .477 lift, I guess they're not maxxed out)
It probably would add some power, assuming your manifold/heads have some "breathing room" and aren't currentlly maxxed out (with .477 lift, I guess they're not maxxed out)
Team Owner
Joined: Mar 2000
Posts: 83,381
Likes: 87
From: Boston, MA
Another HUGE advantage to the 1.6 rockers not the added gross lift, but the fact that the valves will be opened and closed faster. This means that they will be open more longer too allow more total air intake and exhaust to occur.
