TimCubed

I bought an old Jeep that has a 327 3782870 F03I8R, heads 782461. I feel it would be of more value to someone here rather than an off road forum. Does anyone have an estimated value? I thought I would try to sell it here before I have it rebuilt and put it back in the jeep which I'll be doing this week. tcwardlow@hotmail.com

cv67

Your location, a little more info/history on the engine would help
pics are always a plus, price mandatory per forum rules

mr.beachcomber

Before you get too caught up with selling this engine, I think you'll need to do some more homework. Here's the breakdown of your casting numbers:

3782870 = 62-67 327 2-bolt main small journal engine block for cars (including 62-65 Corvettes) & trucks.

F032I8R - F= Flint 03= March I8=18th R=1962 327 for manual transmission (3-spd) in full size cars.

(3)782461= 61-70 cylinder heads with 1.94" intake & 1.50" exhaust. Note: if installed on Corvette with dual 4BRLs, FI, or single 4 BRL valve sizes were increased to 2.02" intake and 1.60" exhaust. Side casting markings were double humps for both castings as were 64cc combustion chambers.

So it's entirely possible you may have fuelie heads on this 327; however, the engine designation leads me to believe you have the 1.94/1.60 heads. Only way to know is take them off for a rebuild.

Hope this helps.

cv67

opif you gave more info you could sell it here no issue pics would help