355 cam for 10.5
Thread Starter
Burning Brakes
Joined: Oct 2000
Posts: 792
Likes: 0
From: Palatine
355 cam for 10.5
I've been reading old threads trying to suck in as much info I can about cams and lifters, and theres ALOT of stuff to learn (Im just learning). I've asked this question before a few times but with emmisions as the obstical. Without emmisions in mind and getting the full potential of my engine, what should i look into?
355. Manley Forged 5.7, TRW Forged 10.5, Forged Crank, GM 186's Port and polished flows as good as most aftermarket. Manual 4 speed.
Because I have a manual does this mean I can go with a bigger cam then one with the same setup but with a auto? Streetable daily driver, 12 sec 1/4 is my goal.
355. Manley Forged 5.7, TRW Forged 10.5, Forged Crank, GM 186's Port and polished flows as good as most aftermarket. Manual 4 speed.
Because I have a manual does this mean I can go with a bigger cam then one with the same setup but with a auto? Streetable daily driver, 12 sec 1/4 is my goal.
