421 sbc DD2000 Comments welcomed !
Thread Starter
Le Mans Master
Joined: Apr 2000
Posts: 7,562
Likes: 9
From: B'Ville NY
Cruise-In III Veteran
St. Jude Donor '05
Re: 421 sbc DD2000 Comments welcomed ! (robzr)
I've been playing around some more with DD2000 and I'm seeing the potential that both Robzr & Monty & the others here are talking about. It's really quite amazing. I think once I get this engine in place I'll be all :D !
robzr I have the Hooker SuperComp sidepipe headers which do have a large primary tube I can't remember, but it was either 1 7/8 or 1 3/4 when I had measured them. I aslo have the JCL sidepipes which have been proven on the dyno along with at the track :yesnod: .
I measured the block & the bore is the stock 4.125" :)
robzr I have the Hooker SuperComp sidepipe headers which do have a large primary tube I can't remember, but it was either 1 7/8 or 1 3/4 when I had measured them. I aslo have the JCL sidepipes which have been proven on the dyno along with at the track :yesnod: .
I measured the block & the bore is the stock 4.125" :)
