Distributor rebuild service?
Thread Starter
Instructor
Joined: Nov 2003
Posts: 239
Likes: 0
From: UT.
Distributor rebuild service?
Okay guys, I am trying to get my 66 running and have replaced and rebuilt everything but the
Distributor (minus pulling the motor apart) I was thinking of letting a local machine shop rebuild
it as a test before I give him my motor. Or I could send it to corvette central for their rebuild
service. Any recommendations? Thanks, Dust
Distributor (minus pulling the motor apart) I was thinking of letting a local machine shop rebuild
it as a test before I give him my motor. Or I could send it to corvette central for their rebuild
service. Any recommendations? Thanks, Dust
Melting Slicks
Joined: Jul 2004
Posts: 2,865
Likes: 195
From: Maryland
Try Bill Clupper in Ohio. He is a former NCRS President and a very knowledgable with Delco distributors. I had him blueprint a distributor to my engines specs and with parts and shipping was less than $100. I only needed an autocam, weights and springs. slowmobile@aol.com
(330) 924 2211
(330) 924 2211
Last edited by Donald #31176; Feb 5, 2006 at 03:02 PM.
