When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good Morning.
I'm just in the process of purchasing my new 63 and would like to take
a NCRS "type" of class for maint. and/or restore. I'd love on going
classes as well.
Is there such classes available? I know I just missed the
Bloomington.
Thanks in advance.
There is an NCRS chapter in Central NJ. They meet in East Windsor. It is a very active club and they hold tech sessions every other month. You may want to consider joining. I have heard great things abut this chapter including everybody getting involved as opposed to just a few. I already belong to the Del Val chapter however I will probably be also joining this one shortly.
I'm just in the process of purchasing my new 63 and would like to takea NCRS "type" of class for maint. and/or restore...Is there such classes available?
As you said, Bloomington used to offer several excellent restoration "classes" every year. I presume "Corvette U." is still available.
The NCRS national convention, and regional NCRS meets usually offer several classes on restoration topics and judging seminars. The usual length is a couple of hours per seminar.
In the meantime, start your educating yourself. For restoration you should first purchase the NCRS judging manual for 63-64 Corvette. The best restoration book for midyears is Nolan Adams book. Also, M.F. Dobbins "Fact Book" for the midyear Corvettes will be an excellent photographic reference to show the difference in the midyears. The chassis restoration book by Joe Tripoli is also very good, and if you actually start a restoration, the Assembly Instruction Manual for 63 Corvettes will be necessary.
Maintenance basics are the same for midyear Corvettes as for most other cars. Investment in a reproduction copy of the GM service manual for 63 Corvettes would be a good idea for the specific details.
Thank you for the great reading leads. I'll look at amazon for each of the
books you describe. She had a frame off a couple of years ago and I very much wish to not only learn how to bring her up to judgeing class but maint. as well.
I'll look at amazon for each of the
books you describe.
I never tried Amazon for Corvette books, but if they stock them, it will probably be cheaper. If they don't have them, the books can be found at most Corvette vendors.
You can also buy the books through the NCRS website (www.NCRS.org). You don't have to be an NCRS member to buy there, and the prices are probably competetive with everyone else. If you are an NCRS member, you will also get a nice discount on the literature, which adds up when you are just getting started.
dwdmguy--if you are going to Corvettes at Carlisle-Aug 23-25-NCRS will have their booth under the grandstand and at the NCRS display. You can get any books they have at the member discount price as a special for the show. :yesnod:
I don't think you can get the NCRS Technical Information & Judging Guides at Amazon. Correct me if I'm wrong guys, but I think that you must buy those through NCRS directly. At any rate, if you're looking for originality details, date codes, how to ID an original from a repro part etc, the TIM&JG is your best bet. :) ~Juliet
Correct me if I'm wrong guys, but I think that you must buy those through NCRS directly.
Well, of course, Jules...We thought that was so intuitively obvious that we were only talking about those other tomes published for real profit. Our mistake...NCRS for the judging manual. Then, dwdmguy should try all the mentioned sources until he finds the cheapest copy of everything. ;) :D :D
At any rate, if you're looking for originality details, date codes, how to ID an original from a repro part etc, the TIM&JG is your best bet. :) ~Juliet
I am a little skeptical about the TIM&JG giving enough detail to ID an original part from a repro (I'm talking about those with beyond-intuitively-obvious differences).
In my opinion, the only way to really understand the difference between original parts and good repros is to have a known original in one hand and the part being evaluated in the other (Assumes that restamps are not repros; otherwise this technique would require more body building to be effective :D ). Using this technique, you are limited only by your powers of observation, and not someone's ability to write down what he sees.