Wiper Relay Switch Alignment
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,608
Likes: 3
From: TEXAS - you mean there are other states?
Wiper Relay Switch Alignment
HELP ! The Wiper Relay switch does not align with my wiper arm.
I realize that the switch has a larger diameter circular ‘foot’ that serves to allow for a larger contact surface area, but it just does not seem to align. (This is actually my new switch, but the circular area was cracked off – I have to order a new one.)
As you can see in the pictures, things just don’t line up. The switch mostly looks too low for the arm. The bracket that supports the switch looks all in tact and not bent. I have checked the Assembly Manual and all looks good. The red color is from a shop rag to give color and depth differential.
Thank you for the help.
[Modified by kaiserbud, 10:21 AM 11/24/2002]
I realize that the switch has a larger diameter circular ‘foot’ that serves to allow for a larger contact surface area, but it just does not seem to align. (This is actually my new switch, but the circular area was cracked off – I have to order a new one.)
As you can see in the pictures, things just don’t line up. The switch mostly looks too low for the arm. The bracket that supports the switch looks all in tact and not bent. I have checked the Assembly Manual and all looks good. The red color is from a shop rag to give color and depth differential.
Thank you for the help.
[Modified by kaiserbud, 10:21 AM 11/24/2002]
