Additional Frame dimensions needed.
Thread Starter
Instructor
Joined: Jan 2002
Posts: 191
Likes: 0
From: Commerce Twp. Michigan
Additional Frame dimensions needed.
Gents,
I found a good shop to check my frame, but now we are in search of some accurate data to measure. I have the bench data out of the chassis restoration guide but we really need some cross measurements from coner to corner to see what work we have to do.
As always, any help would be greatly appreciated.
John :thumbs:
I found a good shop to check my frame, but now we are in search of some accurate data to measure. I have the bench data out of the chassis restoration guide but we really need some cross measurements from coner to corner to see what work we have to do.
As always, any help would be greatly appreciated.
John :thumbs:
Thread Starter
Instructor
Joined: Jan 2002
Posts: 191
Likes: 0
From: Commerce Twp. Michigan
Re: Additional Frame dimensions needed. (Mike Ward)
OOps, sorry, it has been a long week. :banghead: I am working on a 65 Convertible.
Boy, I hope my wife doesn't see this thread. :_dupe: She is supposed to read my mind.
Thanks,
John :thumbs:
Boy, I hope my wife doesn't see this thread. :_dupe: She is supposed to read my mind.
Thanks,
John :thumbs:
Melting Slicks
Joined: Apr 2002
Posts: 2,620
Likes: 0
From: 20 forward gears to shift through in MD
Re: Additional Frame dimensions needed. (mac383)
Yu may want to look at the Chassis Service Manual as it has a section on the frame (and a pretty good picture). If I recall correctly, I ~believe~ you might be able to get all the cross dimensions you need... :cheers:
