When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Theres some pictures of this somewhere, i just dont remember where. I know when i did it for the front i pulled the wheels and removed, wheel well liner, just a couple of screws so i could get my hand in there.
Be careful with those screens, they scratch paint so easy. Dont ask me how i know this
There are different styles some are prees fit with 2 sided tape. Some use velcro, and some use the screw in type for the foog light screens anyway. The brake duct screens are held in place by the brake ducts themselves. The side screens are a little harder to get to as you must take the inner wheel well liner out. Not a bad job just takes a little longer to do.