All,

I have bought 5 two post auto lifts from another forum member in NJ. These lifts are Benwil TP-7, 7000 lbs. cap(base at the bottom). Presently, all the lifts run on 3 phase electric, I am currently replacing the motors so they will run on single phase. I will have three that we have for sell. These lifts are in north Columbus and I dont have a exact sell price yet, but we are thinking around $1500 or less.

Thanks,

 

I may be interested. Any pics?

 

Me too

 

hey, I'm here in columbus, keep me advised please. thanks

 

[QUOTE]I may be interested. Any pics?................me also

:seeya

 

I might be interested as well. Do you know how tall these things are installed?

 

Pics? Are the lifts reliable for storage? :flag

 

UPDATES:

I have two Benwil TP-7 available (three-phase electric).

Specifications:
-7000 lb capacity
-2 post columns, each column is 9 feet. The side with the motor is 9 foot 8 inches.
-area between posts is 10 feet. Overall width is 12 foot.
- there is a plate that you drive over that contains the cables.

PRICE for each 3 phase unit = $1300

Presently, the lift is set up in Delaware. If interested please shoot me an email. I dont have pictures yet, but will in the next few days. We can deliver and setup the lift at your location for an additional cost.

I have two more Benwil TP-7 that are almost assembled. Presently, there are set up on three-phase electric. I bought all of these lifts to convert to single phase and I had some request for three phase, so this is why I am posting presently. If not one is interested in the three phase, we will convert them into single phase.

We are setting up each lift in our shop so the buyer can inspect & operate it before making any decision. Once again this are nice heavy-duty type of lift. These lifts are built alot better than many I have seen in the $3000 range, I won’t even comment on the 4 posts lifts. I bought a new 4-post lift 6 months ago, before I came across these. The 4 post lift looks weak compared to these Benwils. If you like the Benwil lift, pay for it and haul away from our shop(we have fork trucks) or we can deliver and setup at your location (for additional cost).

We have one single-phase motor presently and have an order out with our machinist to built the correct collar for the each motor so the drive gear will work.

If no one is interested in three phase, these united will be converted to single phase and hopefully we will set a price at $1500 each.

Thanks and I will keep you guys posted...

 

Updates:

I have upload a sample picture of the lift. We have all of the lifts put together. The price for the single phase units is $1500 and are located and are set-up in Delaware (north Columbus).



We can deliever and set up the lifts are your location for an additional charge or you can pick up. If interested, please send me an email.

Thanks,






[Modified by Cool427shark, 7:02 PM 12/17/2003]