no start
Thread Starter
3rd Gear
Joined: Sep 2016
Posts: 3
Likes: 0
no start
I was tapping the motor around to mark the balancer to set the timing. after 5 bumps the car went dead.will not crank., have 12 v. at the battery and the main connection @ the starter. no interior lights or headlights. going to check the ignition switch but I would post in case i'm missing something obvious.. it's a 67 coupe 427...
IB Staff
Joined: Feb 2009
Posts: 10,583
Likes: 4
I was tapping the motor around to mark the balancer to set the timing. after 5 bumps the car went dead.will not crank., have 12 v. at the battery and the main connection @ the starter. no interior lights or headlights. going to check the ignition switch but I would post in case i'm missing something obvious.. it's a 67 coupe 427...
Go back to the main forum page:
https://www.corvetteforum.com/forums/
Now start to slowly scroll down until you see the generation of your Corvette. 1967 Corvette? That's a C2 and is part of the C1 and C2 section as noted in the description of following:
https://www.corvetteforum.com/forums...-1953-1967-21/
Got a technical question about the C2? Use the C1 & C2 Discussion forum:
https://www.corvetteforum.com/forums...2-corvettes-4/
Thank-you
