C-2 Hard Top Fit
Thread Starter
Heel & Toe
Joined: Jul 2015
Posts: 16
Likes: 5
C-2 Hard Top Fit
I have a "67 with the optional hard top. When installing
the top it takes two men and a small boy sitting on top of it in order for the side mounting bolts to line up. It also distorts the fit of the rear deck lid. I had an NCRS master judge tell me one time that they are adjustable but I don't see where. Any thoughts?
the top it takes two men and a small boy sitting on top of it in order for the side mounting bolts to line up. It also distorts the fit of the rear deck lid. I had an NCRS master judge tell me one time that they are adjustable but I don't see where. Any thoughts?
Team Owner
Joined: May 2004
Posts: 82,175
Likes: 1,319
From: McKinney TX
St. Jude Donor '21-'22-'23-'24
IB Staff
Joined: Feb 2009
Posts: 10,581
Likes: 4
I have a "67 with the optional hard top. When installing
the top it takes two men and a small boy sitting on top of it in order for the side mounting bolts to line up. It also distorts the fit of the rear deck lid. I had an NCRS master judge tell me one time that they are adjustable but I don't see where. Any thoughts?
the top it takes two men and a small boy sitting on top of it in order for the side mounting bolts to line up. It also distorts the fit of the rear deck lid. I had an NCRS master judge tell me one time that they are adjustable but I don't see where. Any thoughts?
Instead, please find the correct section, based on the generation of the Corvette.
Go back to the main forum page:
https://www.corvetteforum.com/forums/
Now start to slowly scroll down until you see your generation of Corvette listed.
C1 or C2 (1953 - 1967)?:
https://www.corvetteforum.com/forums...2-corvettes-4/
We encourage new members to take some time to browse around the site and read the Announcements and Stickies as they contain important and frequently asked information.
Thank-you
