welcome
Hallo
Thread Starter
3rd Gear
Joined: Apr 2007
Posts: 3
Likes: 0
From: Rakkestad Norway
Hallo
boys, and girls if anny.
I've been reading manny interesting threads here from time to time over the past tree years and finely registred to be able to cummunicate with all you greate people.
Have been bussy taking apart and reesseble my 69 coupe and had help from manny of the discussions here, thanks. No, I did not take the body of, but at some point they were the only eight bolts left I think.
Due next week I,ll be taking my vette out on the road. After three yeares in the garage you can only imagin......
Hope to find more interesting issues here to learn from, and nice people to talk to.
Br. from Norway,
Trond.
I've been reading manny interesting threads here from time to time over the past tree years and finely registred to be able to cummunicate with all you greate people.
Have been bussy taking apart and reesseble my 69 coupe and had help from manny of the discussions here, thanks. No, I did not take the body of, but at some point they were the only eight bolts left I think.
Due next week I,ll be taking my vette out on the road. After three yeares in the garage you can only imagin......
Hope to find more interesting issues here to learn from, and nice people to talk to.
Br. from Norway,
Trond.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
3rd Gear
Joined: Apr 2007
Posts: 3
Likes: 0
From: Rakkestad Norway
Thanks
for all welkomming greatings.
The first trip was to the registrasion autoreties. They found the lower balljoint were weared out althoug they are new. And I was told to putt heatshealds on the side pipes.
Another set of new balljoint are mounted and the shealds under fabricating. Finish it this weekend I think. Then of to get it inspected again next week.
Som issues with idlespeed when put in drive I will adress in the tech section. I`m sure someone can help.
Thanks again,
Trond.
The first trip was to the registrasion autoreties. They found the lower balljoint were weared out althoug they are new. And I was told to putt heatshealds on the side pipes.
Another set of new balljoint are mounted and the shealds under fabricating. Finish it this weekend I think. Then of to get it inspected again next week.
Som issues with idlespeed when put in drive I will adress in the tech section. I`m sure someone can help.
Thanks again,
Trond.