with Ricks' comments (above). Just ask and ye shall receive.
Hi from Washington
Thread Starter
2nd Gear
Joined: Sep 2009
Posts: 2
Likes: 0
From: Graham WA
Hi from Washington
Just signed up, I have a White 64 convertible not in bad shape. It was originally a 365 hp 327. Somewhere along the way the engine was changed to a 307 truck motor. I have had a late 63 327 stored in my garage since 1970 so now I am in the process of rebuilding this engine. The rebuild looks identical to the 365 HP engine however I have installed a Comp Cams retrofit hydraulic roller Part #K12-422-8 with 9.6 to 1 pistons. I hope that I do not regret my decision not to go with the 11.25 to 1 and the solid lifter cam. The interior was original black leather, had knife cuts so I have replaced them with Corvette America leather other than that every thing works and is in OK shape. I am looking for recommendations for restoration of my holley 2818 any input would great.
Thanks, Steve
Thanks, Steve
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Welcome to the Forum!!!!!!!!!!! 
Your '64 sounds like a great car. Best of luck getting back to where you want it. Enjoy the Forums. 
If you haven't already done it, head over to the C1/C2 General Forum to ask about specific questions you have. The owners there are passionate about the early cars and will be happy to help:
http://forums.corvetteforum.com/c1-and-c2-corvettes-4/
And be sure to check out the Pacific Northwest Regional Forum for local events, happenings, cruises, other stuff and just local talk:
http://forums.corvetteforum.com/pacific-northwest-127/
Your '64 sounds like a great car. Best of luck getting back to where you want it. Enjoy the Forums. If you haven't already done it, head over to the C1/C2 General Forum to ask about specific questions you have. The owners there are passionate about the early cars and will be happy to help:
http://forums.corvetteforum.com/c1-and-c2-corvettes-4/
And be sure to check out the Pacific Northwest Regional Forum for local events, happenings, cruises, other stuff and just local talk:
http://forums.corvetteforum.com/pacific-northwest-127/
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Apr 2007
Posts: 19,688
Likes: 523
From: Ideals are peaceful...History is violent...St.Charles, MO.
2020 Corvette of the Year Finalist (appearance mods)
C5 of Year Winner (appearance mods) 2019
St. Jude Donor '08-'09-'12 thru'22
Welcome to the Forum!!!
Race Director
Joined: Sep 2008
Posts: 10,777
Likes: 5
From: Wichita Ks
Hey Steve welcome to the Forum Your going to have a really nice car in the end no matter what you put in the motor. At some point in the future if you want more performance you'll know what direction to take. Enjoy 
Your going to have a really nice car in the end no matter what you put in the motor. At some point in the future if you want more performance you'll know what direction to take. Enjoy
