welcome to the forum. 
427cid
Thread Starter
3rd Gear
Joined: Feb 2011
Posts: 3
Likes: 0
427cid
I am looking to re-skin my 2008 ZO6 the car has alot of additonal motor work, cams, headers, high-flow air and Dyno-tune turning out 525lbs torque to rear wheels and 625HP on the Dyno... A local distributor has a set of Goodyear F1's at 449 for rear and 419 for front, the pricing is not my concern as much as should I be using the same skin with the Run_On_Flat searies or not? Please advise before I have them installed, Mato
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Welcome to the Forum!!!!!!!! 
Ask about Z06 tires in the C6 Z06 Forum. Good luck, enjoy the Forums. 
http://forums.corvetteforum.com/c6-z06-discussion-100/
Ask about Z06 tires in the C6 Z06 Forum. Good luck, enjoy the Forums. http://forums.corvetteforum.com/c6-z06-discussion-100/
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
