welcome to the forum!
New guy from PA
Thread Starter
Instructor
Joined: Jan 2013
Posts: 137
Likes: 0
From: Moscow Pa
New guy from PA
Hey guys I have been on this site for a little while but I have never introduced myself...
Anyway I'm from PA. I'm pretty young being 23 years old however I can say I paid for everything myself and i do not get handed anything
I Have a 2001 corvette and i just traded my truck for it. I got the car with a MS4 cam, obx long tube headers, slp loud mouth, 60lb injectors, lowering kit, nitrous (never hooked up), black out kit, and it came painted hot rod black
since i got it i took out the lifters in it so i ordererd luneti street and strip lifters, vitram cold air intake, comp cams trunion kit, fast 36lb injectors, arp head studs, prc 227cc heads with 62cc domes, fast 90mm intake, gm performance 90mm throttle body, and im installing 100hp nozzles in the nitrous system.
while ordering parts for this car i noticed not a lot of people have dyno sheets for a ms4 cam or even prc heads... so i will be sure to post my results
Im also ordering a mgw short throw and a corvette creations lip kit...anyway so far I'm loving the car and i hope she runs good when she is finished.. I used to have a gto 2 year ago but i flipped it into the woods. i also had a 10 second blown s10 with a 383 stroker motor and 6-71 blower
anyway here are a few pictures of my car. let me know what you think
Anyway I'm from PA. I'm pretty young being 23 years old however I can say I paid for everything myself and i do not get handed anything
I Have a 2001 corvette and i just traded my truck for it. I got the car with a MS4 cam, obx long tube headers, slp loud mouth, 60lb injectors, lowering kit, nitrous (never hooked up), black out kit, and it came painted hot rod black
since i got it i took out the lifters in it so i ordererd luneti street and strip lifters, vitram cold air intake, comp cams trunion kit, fast 36lb injectors, arp head studs, prc 227cc heads with 62cc domes, fast 90mm intake, gm performance 90mm throttle body, and im installing 100hp nozzles in the nitrous system.
while ordering parts for this car i noticed not a lot of people have dyno sheets for a ms4 cam or even prc heads... so i will be sure to post my results
Im also ordering a mgw short throw and a corvette creations lip kit...anyway so far I'm loving the car and i hope she runs good when she is finished.. I used to have a gto 2 year ago but i flipped it into the woods. i also had a 10 second blown s10 with a 383 stroker motor and 6-71 blower
anyway here are a few pictures of my car. let me know what you think
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
