New member
#1
Instructor
Thread Starter
New member
Hi all,I've owned my 2008 z06 for a couple years,bought her used in Pennsylvania 2 Winters ago.had 38,000 miles. I'm the second owner. I bought her unmolested,but it didn't take long for me to start modding it! I came from a highly modded 05 GTO that had a f1a procharger then twin turbo, I loved my GTO,took it drag racing quite a bit,had timeslips in the 10.4-10.6 range on a stick shift car,it was alot of fun. Anyhow I've always wanted a Z,and I have no regrets moving on to my current car. I do all my own work and use backstreet performance in Medina as my tuner. I've got the typical boltons now with a heads and cam package coming from Tony mamo soon,hope to be in the 600 rwhp n/a.range.Looking to keep her n/a, my GTO was almost too radical and high maintenance,was one of the reasons I sold her. Anyhow my name is Heath, and looking to find some Corvette buddies out there,I live in ne Ohio. Also I'd be interested in any dragstrip track rentals in the Ohio area,I don't mind going to the regular test and tunes,but really don't like dealing with the typical riff raff lol.
#2
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,917
Received 19,289 Likes
on
13,964 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Welcome to the forum, Heath. That's a great looking Z you have.
#3
Race Director
Member Since: Apr 2017
Location: Hickory NC
Posts: 10,211
Received 863 Likes
on
667 Posts
2022 C5 of the Year Finalist - Modified
2020 C5 of the Year Finalist - Modified
St. Jude Donor '17-‘18-'19-'20-'21-'22-'23-'24
Welcome to the Forum, Heath and congratulations on your sharp Z06!
#5
Race Director
Pro Mechanic
Member Since: Apr 2014
Location: Washington Township Michigan
Posts: 14,521
Received 3,952 Likes
on
2,470 Posts
2024 Corvette of the Year Finalist - Unmodified
2023 C6 of the Year Winner - Unmodified
2020 C6 of the Year Finalist - Unmodified
2019 C6 of Year Finalist (appearance mods)
Welcome to the forum!
Congrats. on your great looking C6 Z06!
May want to check a few tracks in MI, if not too far from you.
Congrats. on your great looking C6 Z06!
May want to check a few tracks in MI, if not too far from you.
#9
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
Welcome to the CF!
#10
Enjoy while you can.
Member Since: May 2008
Location: 10th District Court OHIO
Posts: 17,167
Received 2,685 Likes
on
1,272 Posts
Ohio Events Coordinator
2023 C8 of the Year Finalist - Unmodified
2022 C2 of the Year Finalist - Unmodified
C2 of Year Finalist (stock) 2019
St. Jude Donor '14-'15-'16-'17-‘18-'19-'20-'21-'22-'23-'24
Welcome aboard
#12
Hi Heath
Are you getting Tony's LS7 package...like Erik is currently installing on my GTO?
This is what I'm getting from Tony
Assembled MMS ported 265CC ls7 Heads
PAC 650 springs and Ti retainers
Hollow valve upgrade
Manton custom length Pushrods ( 3/8 x .095 wall)
Yella Terra MMS LS7 Ultralight Shaft rockers 1.85 ratio
234/248 .601 .606 116+4 Custom Cam
MMS ported LSA oil pump
Johnson .058 limited travel lifters with AOL
MSD Atomic Airforce Intake Manifold for LS7 103 mm
I'm also adding this
Holley EFI Billet 105mm LS Throttle Body W/Low RPM Taper and Cable Drive
Russ
Are you getting Tony's LS7 package...like Erik is currently installing on my GTO?
This is what I'm getting from Tony
Assembled MMS ported 265CC ls7 Heads
PAC 650 springs and Ti retainers
Hollow valve upgrade
Manton custom length Pushrods ( 3/8 x .095 wall)
Yella Terra MMS LS7 Ultralight Shaft rockers 1.85 ratio
234/248 .601 .606 116+4 Custom Cam
MMS ported LSA oil pump
Johnson .058 limited travel lifters with AOL
MSD Atomic Airforce Intake Manifold for LS7 103 mm
I'm also adding this
Holley EFI Billet 105mm LS Throttle Body W/Low RPM Taper and Cable Drive
Russ
Last edited by GTO1; 10-17-2017 at 10:42 PM.
#13
Instructor
Thread Starter
Doing his trickflow heads,yt rockers,Johnson lifters,and a specked out cam from him. Also I'm ditching the 1 3/4 pfadt headers for some 2" arh's per his recomendation.
#14
Erik should be pretty good dialing in this package by the time he's done with us. lol
#15
Instructor
Thread Starter
Yeah pretty close,we got different throttle bodies,my cam is a little different not sure on the lift yet but it's a 242/256 on a 114+3. Cr will be around 12.0 . Should rattle the neighbors pretty good lol. He said about 6 weeks,I just want it around January-early February so I can get it all together before spring.
#16
Yeah pretty close,we got different throttle bodies,my cam is a little different not sure on the lift yet but it's a 242/256 on a 114+3. Cr will be around 12.0 . Should rattle the neighbors pretty good lol. He said about 6 weeks,I just want it around January-early February so I can get it all together before spring.