Timmy or Kevin
Thread Starter
Drifting
Joined: Apr 2001
Posts: 1,403
Likes: 0
From: Denver CO
Timmy or Kevin
I need tuning done. The car is running lean and I need to get this handled.
What should I do to the car to get the best result from the tune.
I know it needs spark plugs. I s there anything else?
When can you get me in.
What should I do to the car to get the best result from the tune.
I know it needs spark plugs. I s there anything else?
When can you get me in.
Le Mans Master
Joined: Jan 2000
Posts: 6,595
Likes: 1
From: Thornton CO
Spark plugs are a good start. Are you sure it's running lean? I can bring my laptop to work with me and meet up with you after work or at lunch or something and we can hook it up to TTS Datamaster and make sure it's running lean.
My version of LT1 Edit is locked to my PCM so I can't write the tune to your car but I think Kevin has Tunercat and he can actually write the tune to it - I can write a tune for you, I just can't write it to your car. Let's find out what it's doing first!
My version of LT1 Edit is locked to my PCM so I can't write the tune to your car but I think Kevin has Tunercat and he can actually write the tune to it - I can write a tune for you, I just can't write it to your car. Let's find out what it's doing first!
Le Mans Master
Joined: Jan 2000
Posts: 6,595
Likes: 1
From: Thornton CO
Originally Posted by Glasman66
Sounds great.
The reason I think she is running lean is a dyno I had done the mix was never below 16.5.
The reason I think she is running lean is a dyno I had done the mix was never below 16.5.
Whoa! Was this at Wide Open Throttle?? You need to be down around 12.5 or so! PM me with your phone #!Do you have an exhaust leak or anything? Trouble codes? It could be a bad O2 sesnsor too.
Thread Starter
Drifting
Joined: Apr 2001
Posts: 1,403
Likes: 0
From: Denver CO
Originally Posted by krivera
yep it could be a number of things! when did it start did you do anything different to the car..etc?
Not really sure. I had the computer sent out to recal. my speedometer when I put in the 4.10s, and I ported and descreened my MAF.
I bet that is where the problem is.
I'll give you guys a call.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Le Mans Master
Joined: Jan 2000
Posts: 6,595
Likes: 1
From: Thornton CO
Sorry I haven't called you yet Stan - I've been super busy with work these past 2 weeks, this project ends soon and then I should have plenty of free time!
We can try my MAF sensor (not like I need it right now
)in your car and see if that's the problem if you want.
We can try my MAF sensor (not like I need it right now
)in your car and see if that's the problem if you want.