Roll Cage Needed...
Thread Starter
Burning Brakes
Joined: Jul 2006
Posts: 818
Likes: 0
From: Salinas Cali
Roll Cage Needed...
Hey guys,
I wanna put on a roll cage on my C6 Convertible and I wanted to see if anyone outhere in the bay area has anyone who they can refer me too for this install and work. Thank you
-jose
I wanna put on a roll cage on my C6 Convertible and I wanted to see if anyone outhere in the bay area has anyone who they can refer me too for this install and work. Thank you
-jose
Racer
Joined: Dec 2004
Posts: 341
Likes: 8
Hey whats up Jose, I have a couple of friends with race cars that went to either one of these palces to have their cages done and were happy, check them out. You running in the 10's now???
http://www.wizard-racing.com/
http://www.fullerfabrications.com/Fuller_index.html
http://www.wizard-racing.com/
http://www.fullerfabrications.com/Fuller_index.html
Last edited by iroc90; Aug 27, 2008 at 02:20 PM.
Thread Starter
Burning Brakes
Joined: Jul 2006
Posts: 818
Likes: 0
From: Salinas Cali
Hey whats up Jose, I have a couple of friends with race cars that went to either one of these palces to have there cages done and were happy, check them out. You running in the 10's now???
http://www.wizard-racing.com/
http://www.fullerfabrications.com/Fuller_index.html
http://www.wizard-racing.com/
http://www.fullerfabrications.com/Fuller_index.html
Im hoping to hit 10's.. on 09/13 but right now im at 11.5 with bolt ons..
Le Mans Master
Joined: Jul 2001
Posts: 8,183
Likes: 3
From: Santa Maria, CA
If you are doing a full cage that fully surrounds you, go for chrome-moly. Much lighter than steel.
I did a full surround type cage in mild steel first. Mocked it up outside the car, was ridiculously heavy.
Did the same one in CM, way lighter, much better.
I believe the spec is 1¾" O.D. and .08something thickness.
.083 I think.
TIG welded.
I did a full surround type cage in mild steel first. Mocked it up outside the car, was ridiculously heavy.
Did the same one in CM, way lighter, much better.
I believe the spec is 1¾" O.D. and .08something thickness.
.083 I think.
TIG welded.
Last edited by pablocruise; Aug 27, 2008 at 04:32 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Melting Slicks
Joined: Jul 2007
Posts: 3,097
Likes: 5
From: Brentwood World's first A6 in the 9's (including N/A, blower, turbo and nitrous cars) 9.950@139.267 CA
Safety Car
Joined: May 2005
Posts: 3,520
Likes: 3
From: Redwood City CA