Wrap Material?
11-13-2018, 08:57 AM
#1
Melting Slicks
Thread Starter
Member Since: Jun 2005
Location: Rock Hill SC (Charlotte NC Area)
Posts: 2,363
Received 683 Likes
on
444 Posts
2022 C8 of the Year Finalist - Modified
2022 C7 of the Year Finalist - Unmodified
Wrap Material?
For any of those in the wrap business, I'm curious if you might have any opinions about a couple different materials I'm looking at. This is actually for wrapping some interior trim pieces on a different vehicle...not my Vette...but figured there were probably some folks on the forum with experience. I'm not a professional by any means, but I have wrapped quite a few interior parts on my own vehicles in the past. I have pretty much only worked with 3M Scotchprint in the past, but after looking at some samples, the two choices I've narrowed down to for this project are from KPMF (Matte Iced Blue K75400-K75505) and HEXIS (Skintac Satin Blue Super Chrome HX30000 HX30SCH05S).
I'm not familiar with either of these materials, and wondered if anyone had any opinions from experience, how KPMF and/or HEXIS material compares to 3M Scotchprint material from an ease of installation standpoint, and how well either of them are suited for wrapping interior trim parts.
I'm not familiar with either of these materials, and wondered if anyone had any opinions from experience, how KPMF and/or HEXIS material compares to 3M Scotchprint material from an ease of installation standpoint, and how well either of them are suited for wrapping interior trim parts.
