New Dyno #'s
Thread Starter
Former Vendor
Joined: Nov 2005
Posts: 478
Likes: 0
From: Schaumburg IL
New Dyno #'s
refresh....
2002 Z06 21,xxx miles
-Speed Inc. SI007 cam
-Comp 918's
-Comp Pushrods
-SW LT's no cats
-TI catback
-SLP Pulley
-Raptor XXL
I made 423rwhp/399 rwtq. The car drove better then stock and I couldn't have been happier.
add: 3.90 gear and Nitto 305 Drag Radials
410 rwhp/386rwtq
car ran 11.38@122 first time out on M/T Radials
I added RGR Stage 1 LS6 heads this weekend. These are ported using stock valves and milled .025. We cleaned up the LS6 intake & TB a bit as well.
The weather is humid due to a lot of rain here, but still some good numbers.
429 rwhp/ 390 rwtq
so....with a a stock gear and tire I would be at 440+ rwhp with a car that drives and sounds near stock. I couldn't ask for more.
I plan to be at the track this weekend shooting for a new best.
I would like to thank our tuner Jim (A.K.A INTMD8) for the awesome custom grind cam and tuning.
Larry
www.ls1speed.com
2002 Z06 21,xxx miles
-Speed Inc. SI007 cam
-Comp 918's
-Comp Pushrods
-SW LT's no cats
-TI catback
-SLP Pulley
-Raptor XXL
I made 423rwhp/399 rwtq. The car drove better then stock and I couldn't have been happier.
add: 3.90 gear and Nitto 305 Drag Radials
410 rwhp/386rwtq
car ran 11.38@122 first time out on M/T Radials
I added RGR Stage 1 LS6 heads this weekend. These are ported using stock valves and milled .025. We cleaned up the LS6 intake & TB a bit as well.
The weather is humid due to a lot of rain here, but still some good numbers.
429 rwhp/ 390 rwtq
so....with a a stock gear and tire I would be at 440+ rwhp with a car that drives and sounds near stock. I couldn't ask for more.
I plan to be at the track this weekend shooting for a new best.
I would like to thank our tuner Jim (A.K.A INTMD8) for the awesome custom grind cam and tuning.
Larry
www.ls1speed.com
Former Vendor
Joined: Feb 2003
Posts: 136
Likes: 1
From: Schaumburg IL
