New Best at Atco.
Thread Starter
Advanced
Joined: Jul 2006
Posts: 98
Likes: 0
From: columbus nj
New Best at Atco.
I have a 99 FRC only mods being c6 z06 shifter, ls6 intake, vararam, and kumho ecsta mx's.
First couple runs my clutch was giving me issues with sticking/ not letting me shift right. but the last run of the night i pulled to the line with a oil temp of 175 and a coolant temp of 160 (everything in the world broke on the track and dumped oil.)
60' - 1.968 1/8 mile 8.141 @ 89.39 1/4 Mile 12.481 @ 112.32
my previous PB before vararam with a open 04 cobra filter ( i know) was
60' - 1.935 1/8 mile 8.159@87.40 1/4 Mile 12.583 @109.72
I think i can chop it down a little with some more seat time.. and more learn in.. had to reset ECU before pulling to the line because i got the reduced engine power display. so intake might need to learn in! hopefully getting back to track with a good clutch so i dont keep smoking this one!.
First couple runs my clutch was giving me issues with sticking/ not letting me shift right. but the last run of the night i pulled to the line with a oil temp of 175 and a coolant temp of 160 (everything in the world broke on the track and dumped oil.)
60' - 1.968 1/8 mile 8.141 @ 89.39 1/4 Mile 12.481 @ 112.32
my previous PB before vararam with a open 04 cobra filter ( i know) was
60' - 1.935 1/8 mile 8.159@87.40 1/4 Mile 12.583 @109.72
I think i can chop it down a little with some more seat time.. and more learn in.. had to reset ECU before pulling to the line because i got the reduced engine power display. so intake might need to learn in! hopefully getting back to track with a good clutch so i dont keep smoking this one!.
Team Owner
Joined: Feb 2001
Posts: 27,254
Likes: 136
From: Short Hills, NJ
Originally Posted by chiefDave
PS 11s with some DRs?
Melting Slicks
Joined: Sep 2003
Posts: 2,911
Likes: 1
From: Augusta GA
St. Jude Donor '05-'06
Originally Posted by LS1LT1
Even with the awesome gains that DRs will bring it's still going to be somewhat difficult to do with those 3.42 gears and especially with his tired clutch...but with a new clutch, DRs, some tuning and some -1000 DA air it could very well be possible.
purple haze running through my...Good luck man!
Dave
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Advanced
Joined: Jul 2006
Posts: 98
Likes: 0
From: columbus nj
Haha yeh. deff hoping for 11's with DR's on the new clutch. and if i dont go 11's ill just spray it.. the kits all hooked up and ready to go!
i sprung for the textralia clutch with z06 hydrualics. hydrualics are here. and the clutch should be here within 24 hours! now i gotta get it all installed.
i sprung for the textralia clutch with z06 hydrualics. hydrualics are here. and the clutch should be here within 24 hours! now i gotta get it all installed.
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Dang Chumma, that's moving for such few mods! Nice job! 
Hope to see you out there sometime, should be breaking in my car at the T&T on the 18th.
Hope to see you out there sometime, should be breaking in my car at the T&T on the 18th.
