What should it run???
Oct 6, 2010 | 05:43 PM
Thread Starter
Instructor
Joined: Jun 2006
Posts: 224
Likes: 0
From: Huntsville Alabama
What should it run???
I just picked up a 97 A4 Corvette 2.73 gear.
Mods are:
243 heads
Ls6 intake
VRX5 cam
obx longtube
obx cat-back
3000 stall
The car will be on 315/30/18 BFG drag radials.
Thanks
Brad Morring
Oct 6, 2010 | 05:50 PM
Joined: Jan 2007
Posts: 944
Likes: 0
From: Houston TX
Oct 6, 2010 | 06:02 PM
Thread Starter
Instructor
Joined: Jun 2006
Posts: 224
Likes: 0
From: Huntsville Alabama
Probably going to Steele,AL.. I've never had any luck at Montgomery (No traction)
Oct 6, 2010 | 06:59 PM
Le Mans Master
Joined: Mar 1999
Posts: 6,029
Likes: 85
From: Palm Coast, FL
Oct 6, 2010 | 07:24 PM
Melting Slicks
Joined: Apr 2007
Posts: 2,787
Likes: 22
From: Lititz PA
Quote:
Originally Posted by
Brad02z06
I just picked up a 97 A4 Corvette 2.73 gear.
Mods are:
243 heads
Ls6 intake
VRX5 cam
obx longtube
obx cat-back
3000 stall
The car will be on 315/30/18 BFG drag radials.
Thanks
Brad Morring
How do you like that cam with the 2.73s? I have the same cam with a M6 & 3.90s and it hits like a ton of bricks at 3500.
Oct 6, 2010 | 08:36 PM
Thread Starter
Instructor
Joined: Jun 2006
Posts: 224
Likes: 0
From: Huntsville Alabama
The cam's not so great with the 2.73 when it shifts from 1st to 2nd it gets out of the power briefly. With some 3.42's I think it will be better.
Why the ****ty et with a decent mph. The car will probably 60ft in the 1.7's just from the feel.
Oct 6, 2010 | 09:31 PM
Le Mans Master
Joined: Mar 1999
Posts: 6,029
Likes: 85
From: Palm Coast, FL
Quote:
Originally Posted by
Brad02z06
The cam's not so great with the 2.73 when it shifts from 1st to 2nd it gets out of the power briefly. With some 3.42's I think it will be better.
Why the ****ty et with a decent mph. The car will probably 60ft in the 1.7's just from the feel.
figure you would spin the tires and in the end have the MPH
not too sure the 1.7's are possible with the gear (sorry). I was only getting about 1.8's -AFTER- I changed gears to 342's. now
I'm now running 373's.
what sort of times are you getting with your TT?
After reading Mark-44's post with him running an 11.73 with 2.73's . . . I have Absolutely NO idea anymore
Last edited by Rob Petyo; Oct 6, 2010 at 09:40 PM .
Oct 8, 2010 | 11:24 PM
Melting Slicks
Joined: Feb 2007
Posts: 3,194
Likes: 10
From: New Smyrna Beach Florida
I'm gonna guess 12.2 at 116.
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Oct 9, 2010 | 07:40 AM
Drifting
Joined: Jul 2003
Posts: 1,257
Likes: 4
From: Granite City Illinois
Quote:
Originally Posted by
motogib1
I'm gonna guess 12.2 at 116.
could get into 11's with good air and lots of seat time.
1997 ,
35811 ,
97 ,
alabama ,
brad ,
c5 ,
corvette ,
drag ,
gears ,
hpe ,
huntsville ,
morring ,
phillip ,
run