dynoed my ZO6
Thread Starter
Racer
Joined: Jun 2006
Posts: 267
Likes: 6
From: nashville Tn
dynoed my ZO6
I dynoed my 2001 ZO6 at the LS fest in BG this past weekend.
Thought I would share my results.
Mods are
Hurricane cold air kit (came on car when I bought it)
cammotion 232/244 on a 112 and +4 on intake.
I milled heads and used mls headgaskets.
Trickflow pushrods, springs, ti retainers, shims,and seals.
slp underdrive balancer,xspower headers and xpipe no catts.
A great (street) tune by James Short.
Thought I would share my results.
Mods are
Hurricane cold air kit (came on car when I bought it)
cammotion 232/244 on a 112 and +4 on intake.
I milled heads and used mls headgaskets.
Trickflow pushrods, springs, ti retainers, shims,and seals.
slp underdrive balancer,xspower headers and xpipe no catts.
A great (street) tune by James Short.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Jun 2006
Posts: 267
Likes: 6
From: nashville Tn
Racer
Joined: Oct 2010
Posts: 323
Likes: 9
I do not understand the nice numbers for a 01 comments.
The only thing 02's -04's have on the 01's are a little more lift on the cam, and two less cats, which by the original post seem to have been addressed, or am i wrong?
If you put a cam, and some type of x pipe or whatever to take care of the extra cats, the 01 would be the same, right?
The only thing 02's -04's have on the 01's are a little more lift on the cam, and two less cats, which by the original post seem to have been addressed, or am i wrong?
If you put a cam, and some type of x pipe or whatever to take care of the extra cats, the 01 would be the same, right?
Thread Starter
Racer
Joined: Jun 2006
Posts: 267
Likes: 6
From: nashville Tn
The valves are lighter in 02 to 04. plus the other stuff.
I may have the heads cnc ported, replace valves and a very nice valve job this winter and port match the ls6 intake.(Maybe)
I am very happy now though
I may have the heads cnc ported, replace valves and a very nice valve job this winter and port match the ls6 intake.(Maybe)
I am very happy now though
