Black Brick lives again
Thread Starter
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
Black Brick lives again
Thread Starter
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
Thread Starter
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
roughly 240/250, 600/630 on a 112 lsa
Not sure if Pete wants me to post the grind or not. I was surprised it is still kind of a sleeper like the last cam (232/601 on 113).
Vid from exhaust
http://vid895.photobucket.com/albums...ps153310e1.mp4
You can hear the motor crying.......... MIR-MIR-MIR
What..14-15 weeks away !!!
Not sure if Pete wants me to post the grind or not. I was surprised it is still kind of a sleeper like the last cam (232/601 on 113).
Vid from exhaust
http://vid895.photobucket.com/albums...ps153310e1.mp4
You can hear the motor crying.......... MIR-MIR-MIR
What..14-15 weeks away !!!
Last edited by pit-man; Jul 22, 2014 at 07:30 PM.
Thread Starter
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
Thanks Gary.
I am waiting on a new Walbro 450 pump and Hotwire kit to arrive. My fuel pressure is about 49lbs at idle and drops to 42 when revving at all.
Racetronix hasn't responded in email that it has shipped. I am starting to worry it will not arrive for this weekend. Time is short.
I am waiting on a new Walbro 450 pump and Hotwire kit to arrive. My fuel pressure is about 49lbs at idle and drops to 42 when revving at all.
Racetronix hasn't responded in email that it has shipped. I am starting to worry it will not arrive for this weekend. Time is short.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Jan 2004
Posts: 1,419
Likes: 6
From: Alamosa CO
Sounds great Pitt! Are you going to bring it to the LS Fest? That would be a good place to get it dialed in. Track prep there last year was pretty good, but it's still pretty hot in BG in early September.
Jimbo
Jimbo
Thread Starter
Le Mans Master
Joined: Aug 2007
Posts: 6,473
Likes: 297
From: Orange Park FL
That was my plan. Rick and I both plan to run our junk and get the bugs worked out for the MIR event.
I may need a meth kit because of the heat.
I am set back a week now as my Hotwire kit for the fuel pump won't be here till Monday (going to lose this weekend). Time is flying by
I talked to Pete yesterday and he wants to come with me for the dyno tuning.
Last edited by pit-man; Jul 24, 2014 at 03:35 PM.
Drifting
Joined: Jan 2004
Posts: 1,419
Likes: 6
From: Alamosa CO
We are going, last year was a blast, I ran in the "true street" class which actually was great fun, and the 30 mile drive before the finals on Saturday was actually at least 30 miles. Due to the very decent track prep at Beech Bend, I screwed up 2 out of 3 launches in the finals, (bogged) and it cost me 1st place in the 11.0 bracket! That WILL NOT happen this year! I'm "in it to win it". 
We will be staying at the Holiday Inn Express on Three Springs Road In BG. They should be one of the host hotels and usually offer a discount to all Fest participants.
Hope to see you there Pete!
Jimbo
We will be staying at the Holiday Inn Express on Three Springs Road In BG. They should be one of the host hotels and usually offer a discount to all Fest participants.Hope to see you there Pete!
Jimbo