TX Z06 02

First run with new mods (A&A V2 with meth injection, RST clutch and C6Z rear diff upgrades).

I was babying it off the line, a little timid about a hard launch on the new clutch/diff. I launched at ~1500 rpms. So my 60'/330' obviously sucks.

Based on the MPH, whats the best to hope for? Is it a 10 second car?

frZ

I'm not an expert but my guess would be with a good 60 foot the car could see low low 11s mid to high 10s? Just my 2 cents 130mph is flying

Shirl

Mine went 10.86 with the same MPH. My 60' was 1.7xx with similar mods as yours.

TX Z06 02

Awesome. Getting my "10sVette" license plate made

John4cam

They say for every tenth in the 60 it equals two tenths in the quarter. Good 60ft should put that car in the mid tens easily with the mph you're trapping

TX Z06 02

That's what I was thinking too but I didn't want to be too confident. I would still have to put it all together and get a good run and let's face it, making 2 passes every 6 months doesn't get me enough practice. I need to start going more.

neutron82

it's definitely capable if you get the 60' down and drive the hell out of it... there was a certain someone in the forced induction section a year or 2 ago that got a lot of flack for getting a plate without the slip, don't be that guy

Shirl

You have 3.42's right? Mine only has the 3.15's, so the gearing will help also.

TX Z06 02

Lol. That was the joke I was making. Never running 10's (or 8's in his case) but putting it on the license plate anyway.

TX Z06 02

Yessir. 3.42's

luvTTwins

What tires are you running

Drive it like you stole it man, I went 10.6 @130 in my z, with a 1.52 70'

Put the pedal down and never look back.
You've got 10.5x@132 if you push it.

mcshocks

I went 10.5x at 129.xx mph on a 1.55 60', we did run out of gear about 300' before the finish line though. Make that thing leave and it's got 10's no question

TX Z06 02

305/35/18 MT ET II streets

Just gotta get the launch.

Shirl

You mean.. Yes Ma'am.

TX Z06 02

Pardon me!