drwprtcht

Got my car done and tuned this past weekend - thought I'd share the results!

Texas Speed & Performance custom grind camshaft & LS6 2.5 CNC heads. Fast 102mm, NW 102, Halltech 102mm. Tuned by SDPC.

drwprtcht

Stopped the pull at 6500 but after looking at the graph I wish we would have pulled it just a little bit more! Nitrous coming soon, will probably see how much more it will do on motor at that time.

96darkhorse

Nice numbers! Yea its still climbing a bit. I'm assuming this is on a stock bottom end ls1?

corvet786c

Nice torque curve and good results. I have the Fast 102 on my procharged LS6, That's it in my avatar photo

drwprtcht

Yeah SBE LS6 in my C5Z

Stroker87

looks identical to mine 475rwhp 415rwtq n/a 599rwhp 600rwtq with a button safe tune

BTR ls1 stg 2 cam
2.5 heads
fast92 / ls2 ported TB
TSP Lt's catless BB axle back
powerbond underdrive pulley
42lb injectors (maxed out stock)
vararam ramair & power duct
3.73 gear (when dyno'd now 3.90)
monster stage II (when dyno'd now lt1-s)

car ran a best of 11.21 @ 122mph N/A probably go 10's if driven hard haven't ran with the button but hoping for a 10.5 or faster

N/A cars a blast to drive really dont use the button much to be honest but it does come in handy at times

almosttherec5

I pray for numbers like that! I can from a pulled 03 cobra worth 460hp, if I get 470 and 600 pounds lighter I will be thrilled... my current list is.
Btr cam kit- 700
ported 220 heads -2150
Ported fast 102 intake -820
Cold air - 224
Ls2 fuel rail - 166
36# injectors - 260
Used ls2 throttle body-
Kooks headers- 700 …...............................got
Cat back-545..……................................. ....got

Hetting the heads and fast intake ordered next weekend... god I hope 470hp!!!