16" rear rims for drag racing?
10-05-2018, 01:01 PM
#1
Drifting
Thread Starter
16" rear rims for drag racing?
For those of us who don't want to go the spindle + weld route (for 15"), what are others using in the 16" rim diameter for drag racing? Last time I researched this I found you had to grind the caliper a bit, no big deal to me. Looking to run a bias ply and making mid 700s for hp at the rears.
10-05-2018, 01:44 PM
#2
Le Mans Master
For those of us who don't want to go the spindle + weld route (for 15"), what are others using in the 16" rim diameter for drag racing? Last time I researched this I found you had to grind the caliper a bit, no big deal to me. Looking to run a bias ply and making mid 700s for hp at the rears.
My 16" Bogarts fit great but hit the banjo bolt. I had to grind it down to clear. I am currently searching for calipers that have the banjo coming in lower or on the side.
Pitt
The following users liked this post:
nullpointer (10-05-2018)
The following users liked this post:
nullpointer (10-05-2018)