Finally Went to Track with Gears and Yank SS3800 & Stock Motor!!!
#1
Melting Slicks
Thread Starter
Member Since: Apr 2002
Location: louisville ky
Posts: 2,299
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In VII Veteran
Finally Went to Track with Gears & Yank SS3800 & Stock Motor!!!
Best time out of three runs was 8.18 1.78 60ft with 85 MPH in 1/8 mile. Air was so terrible 29.90 bar 85 degrees and 74% hum . I also had a exhaust leak at engine. Left starting line at 1800 rpms and it hooked decent on BFGs. Got to love that Yank conveter though. car seems like it will leave good when I get motor tuned with my HP Tuner. This thing was pig rich so I know I can make more power. Need to hook up my wideband this week! Before I did this the guy I bought car from went 8.81 with 2.14 60ft at 86.70 mph. They didnt have scales hooked up so I Wonder what this car weights with 225 lb driver??? 3500
[Modified by DragMan, 8:16 AM 6/12/2004]
[Modified by DragMan, 8:17 AM 6/12/2004]
[Modified by DragMan, 8:18 AM 6/12/2004]
[Modified by DragMan, 8:18 AM 6/12/2004]
[Modified by DragMan, 8:16 AM 6/12/2004]
[Modified by DragMan, 8:17 AM 6/12/2004]
[Modified by DragMan, 8:18 AM 6/12/2004]
[Modified by DragMan, 8:18 AM 6/12/2004]
#3
Melting Slicks
Thread Starter
Member Since: Apr 2002
Location: louisville ky
Posts: 2,299
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In VII Veteran
Re: Finally Went to Track with Gears & Yank SS3800 & Stock Motor!!! (LittleBoyBlu99)
hope to go this weekend! I have got all exh leaks fixed and got Vararam on and also have a wideband if I can get it to work! Want that 7.99 in 1/8 mile and also looking for 1.69 60 ft but most likely will need ET Streets.
[Modified by DragMan, 11:13 PM 6/16/2004]
[Modified by DragMan, 11:13 PM 6/16/2004]
#4
Racer
Re: Finally Went to Track with Gears & Yank SS3800 & Stock Motor!!! (DragMan)
You should be able to do better with that set up. My A4 WS6 /w SS3800 and 3.73's ran a 1.61 60' time and a 7.76@86 mph 1/8th mile with well over 3800 lbs race weight.