Roll Bar
Melting Slicks
Joined: Aug 2002
Posts: 3,333
Likes: 1
From: Central NJ/PA
Originally Posted by Tsab
Anybody have advice on where in NJ to get a Roll Bar installed? Looking to have a welded unit installed no bolt-ins.
1) East coast supercharging, I've seen a few of there C5 bars and they all look great, good pricing as well.
2)Neverlift, I've seen some there work(very nice) but nothing in a C5. and I have no idea on there pricing.
I need to store some greens before I send my car to ECS, but I'm pretty sure it will be there before the end of the year, if they have the time. There are some pics on the thread I started a while back.
http://forums.corvetteforum.com/showthread.php?t=925484
Instructor
Joined: Jun 2003
Posts: 115
Likes: 0
From: Savannah MO
Vert Bar
I am looking for a good 6 point for my 2000 vert. It is triple black with the chome Zo6 wheel. I have seen the bolt in kit from Wolfe racing and read the NHRA rules to ensure it would comply if I weld the rear bars. Since that is good I would like to get it, but it is only available in powder coat black and I would like it in chrome. The mild steel weighs 80-85 lbs. Since I auto-x that is a good add on. I am going to go with the chromoly which cuts the weight to 60-65 lbs. I just need to find a place that can chrome the bars if I buy them bare.
Le Mans Master
Joined: Jun 2003
Posts: 9,251
Likes: 217
From: 2007 Nat'l Corvette Challenge 11.50 index Champ. New Jersey
Originally Posted by Tsab
Anybody have advice on where in NJ to get a Roll Bar installed? Looking to have a welded unit installed no bolt-ins.
Pro
Joined: Aug 2000
Posts: 573
Likes: 0
From: EAST ROCKAWAY NY USA
Roll Bars
Either Neverlift or East Coast Supercharging roll bars will suit your needs they both do clean work .I have seen work from both and they look great .I would not have any problems using one of there bars in my car
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Feb 2000
Posts: 32,545
Likes: 2
From: Lithia FL
Cruise-In II & IV Veteran
CI VI Drag Champ!
http://eastcoastsupercharging.com/se...1.htm#rollbars
Jerry can you post pics of your rollbar from Neverlift?
Jerry can you post pics of your rollbar from Neverlift?
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by LS1LT1
I've seen a few C5s (and F-bodies) with bars/cages done by Neverlift and their work seems to be top notch from what I can see.
Have you ever seen any of our custom bars
Team Owner
Joined: Feb 2000
Posts: 32,545
Likes: 2
From: Lithia FL
Cruise-In II & IV Veteran
CI VI Drag Champ!
Originally Posted by dads01dream
W
W I had no idea ECS re-did their website!
Hey guys, if you're reading this post..... The site looks much better.
W I had no idea ECS re-did their website! Hey guys, if you're reading this post..... The site looks much better.
I agree, much better
Drifting
Joined: Oct 2002
Posts: 1,383
Likes: 20
From: Georgetown SC
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by billgilbert
I am looking for a good 6 point for my 2000 vert. It is triple black with the chome Zo6 wheel. I have seen the bolt in kit from Wolfe racing and read the NHRA rules to ensure it would comply if I weld the rear bars. Since that is good I would like to get it, but it is only available in powder coat black and I would like it in chrome. The mild steel weighs 80-85 lbs. Since I auto-x that is a good add on. I am going to go with the chromoly which cuts the weight to 60-65 lbs. I just need to find a place that can chrome the bars if I buy them bare.