chrome plating prices
My quote-does this sound about right?
400.00 per bumper 120.00 for both exterior door handles 70.00 per hockey stick-seat rail Total: 2,000 I got them to give me an estimate on small parts, but they wanted 70.00 a piece for the door locks and one big piece, the grille, came in at $1,000:eek: Does anybody know of a quality chrome plating business that might be a little less expensive? The only local place i found is 4 hours away and they wanted even more money. This quote is from Pauls chrome. Thanks! |
Seems high to me. I had my bumpers, door handles, misc. interior parts and my tail light bezels done (even though people said that they cannot be done) for $1,100.00 plus shipping. I had them done two years ago by Space Coast Plating out of Melbourne, Florida.
|
Originally Posted by Virginia Vettes
(Post 1569058067)
Virginia Vettes:
Bumpers Triple plated $185/ea Door Handles $45/ea Hockey sticks $35/ea 3-4 weeks How much to have the vent window supports re-chromed? :bigears |
remember paying about $12 for outer sdoor handles from GM in 1988
lol |
Virginia vettes has my business. Yall have always delivered great service and parts! I had no idea that you did chrome plating.
|
Originally Posted by Corbrastang
(Post 1569060408)
Virginia vettes has my business. Yall have always delivered great service and parts! I had no idea that you did chrome plating.
|
Originally Posted by Virginia Vettes
(Post 1569061275)
Rechrome 63-67 Convertible Vent frames $185/ea
Polish 63-67 Vent window frames (pieces that holds glass $50/ea) Replace broken pivot 63-67 Vent window frames $20 +part Virginia Vettes |
bumpers replated
Had mine done by Virginia Vettes, great service and quality...two week turn-around. Highly recommend them.
Dave |
I just had my 1967 Chrome bumpers re-chromed at Niagara Custom Plating, Niagara Falls, NY.
3 pc. front bumper - $480. 2 pc. rear bumper set - $440. 1 pc. mirror - $25. Total $945. |
I had '69 rear bumpers and front bumper done last month at St Louis Plating. $850, 4 week turnaround, ready the day they promised, beautiful.
Ready to put on my car re-painted black 2 days ago. Woo, hoo. |
I use a local chromer in Providence, RI and NuChrome is close in Mass. I used the smaller guy because he uses the "original" type of chrome which I think is nicknamed Black Chrome. Other companies use a newer type that looks super but different against original parts. Look into Trivailant and Hexavailant chrome (don't trust the spelling). The type of plating will have a big affect on the cost and durability of the finish.
|
Cobrastang, I used Knox Custom Chrome in Knoxville, Tenn. I personally carried them to there from Birmingham. Of course you could send them. I just liked meeting with the people. They are reasonable. The company does not do polishing of stainless. However, a couple of their employees do. I was very satisfied with their work.
I can get the name and number of a fellow there in Birmingham that did some polishing for me and he is very good. He works out of his home. |
Originally Posted by Virginia Vettes
(Post 1569061275)
Rechrome 63-67 Convertible Vent frames $185/ea
|
Originally Posted by Corbrastang
(Post 1569057908)
My quote-does this sound about right?
400.00 per bumper 120.00 for both exterior door handles 70.00 per hockey stick-seat rail Total: 2,000 I got them to give me an estimate on small parts, but they wanted 70.00 a piece for the door locks and one big piece, the grille, came in at $1,000:eek: Does anybody know of a quality chrome plating business that might be a little less expensive? The only local place i found is 4 hours away and they wanted even more money. This quote is from Pauls chrome. Thanks! |
My husband and I recently had the bumpers, door posts, tag bar, and quite a few mldgs for a 67 Vette re-chromed at Spacecoast Plating in Melbourne Florida. They, by far, did a magnificant job... best Ive ever seen. Charged $210.00 each bmp, $75.00 tag bar, $175.00 door posts and roughly $45/ foot on the mldgs. I cant believe how great they look. It seems these guys really know their stuff! I didnt think the prices were too out of line with other quotes we received... considering the finished product--- we dont plan on going anywhere else from now on. Why cut corners to save a dime. Our motto is "do it right the first time, because time is money". Besides, the last time we tried to go with a cheaper quote, we got less than par on the results. From what I saw when I dropped off our parts they do alot of Corvette parts daily.
I guess "you get what you pay for" right? Their phone # is 321-254-2880. Hope this helps! |
btw, Ive seen first hand what Pauls Plating looks like, and let me just say... BUYER BEWARE. And I think our bumpers are the first Ive seen after replating that no longer had the waves across the top.
|
Just had a quote $250.00 for each bumper
$150.00 for cross bar $ 650.00 total Paw Paw Plating- Paw Paw Michigan, have seen 2-3 cars with their work on it. They do an outstanding job. Now I'm close enough I can drop my parts off and pick them up, so no shipping involved |
A company in Indiana did all of the chrome work, chrome pot metal and stainless steel for my car.
They did an excellent job! It was a quick turnaround and reasonably priced. Custom Metal Finishing-Indiana LLC. 9705 State Rd 38. Hagerstown IN. (765)-489-4089. |
I have done alot of finishing on corvette parts.
I'd reccomend Lawerence Industries in kalamazoo mi 269 552-4999 Also any finishing needs you may have prep wise for any of your metal parts for any vehicle or motorcycles any make or year call us Pro Glow Otsego Mi. 269 694 9790 Our website:
Spoiler
|
Originally Posted by vettelover1208
(Post 1571818549)
My husband and I recently had the bumpers, door posts, tag bar, and quite a few mldgs for a 67 Vette re-chromed at Spacecoast Plating in Melbourne Florida. They, by far, did a magnificant job... best Ive ever seen. Charged $210.00 each bmp, $75.00 tag bar, $175.00 door posts and roughly $45/ foot on the mldgs. I cant believe how great they look. It seems these guys really know their stuff! I didnt think the prices were too out of line with other quotes we received... considering the finished product--- we dont plan on going anywhere else from now on. Why cut corners to save a dime. Our motto is "do it right the first time, because time is money". Besides, the last time we tried to go with a cheaper quote, we got less than par on the results. From what I saw when I dropped off our parts they do alot of Corvette parts daily.
I guess "you get what you pay for" right? Their phone # is 321-254-2880. Hope this helps! Be cautious whom you select, I have a horror story over some re-chromed C1 grille surrounds I can share sometime... |
All times are GMT -4. The time now is 02:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands