Bread box delete on a 85??
I have seen several pictures of early c4's with out the "bread box" where is a good place to pick up the kit ? I hate that huge pad being in the way. Thanks for any help
|
i believe mid america motorworks sells it
|
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
http://i27.photobucket.com/albums/c1...etteJ08005.jpg |
:thumbs: that turned out looking pretty good from what I can see from the pictures thanks for the idea
|
Originally Posted by DarkBlue88
(Post 1573676532)
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
http://i27.photobucket.com/albums/c1...etteJ08005.jpg very nice!may have to try that myself....:thumbs: |
ecklers has it too
|
Originally Posted by DarkBlue88
(Post 1573676532)
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
http://i27.photobucket.com/albums/c1...etteJ08005.jpg |
Walnut Dash Panel 1984-1989 $85 shipped
1 Attachment(s)
I have a custom hand made furniture grade wood dash panel crafted from a single piece of American Black Walnut. The panel is solid wood and a full ½” thick to eliminate warping. It is finished with a high gloss, scratch resistant polyurethane coating. Includes installation hardware and A/C regulator insert and instructions - $85 shipped if you are interested.
(click photo to enlarge) |
thanks but I really dont like the look of wood in the dash, great looking piece though
|
I'd leave the breadloaf alone, but it's your car. Enjoy! :cheers:
|
I removed mine on my 86.Bought the kit. Its a real pain in the but to due.The kit says to cut the brackets with hack saw. I took it out in 1 piece.Have to take dash pad off.Bottom bolts suck.But I think it was worth it.
|
Originally Posted by RJblk85vette
(Post 1573676025)
I have seen several pictures of early c4's with out the "bread box" where is a good place to pick up the kit ? I hate that huge pad being in the way. Thanks for any help
|
All times are GMT -4. The time now is 02:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands