[Clutch]: Just ordered one, this ought to be fun.
 

Well, I just ordered a Dual Friction clutch setup and T/O bearing from Centerforce. It kind of sucks spending money on parts that don't even see daylight. :)

https://www.jegs.com/photos/183dualfriction.jpg

Off to go find headers (again)............

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

Nice clutch.. the 89 had one. I know what you mean.. I'm workin on replacing my radiator today. Improtant part, But nobody will know it's there..

good luck

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

Yea, but at least you have one to replace.....I can't seem to find a spot to put one on my auto. :lol:

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

[QUOTE]It kind of sucks spending money on parts that don't even see daylight. :)
QUOTE]

I here that! :rolleyes:

Re: [Clutch]: Just ordered one, this ought to be fun. (Mr. Magoo)
 

Good choice for a clutch. The one in My GT took numerous beatings and never whimpered(Over 20 passes in the 1.59 60' zone). Pedal feel was a little firmer than stock..but it never chattered. Sorry about the size...but notice the left wheel off the ground? :D Centerforce D/F!

http://members.aol.com/edm27/GTHTP.jpg

Keep us posted.


[Modified by JD 90 383, 12:38 PM 3/28/2002]

Hah... I wish I could wheelie this sucker.

Re: (scorp508)
 

Great clutch! I got one in the race car and it works great. :cheers:

Re: (scorp508)
 

I still remember that day quite well! April 23 1995. Came out at 4000, there was some MAJOR hook seeing tubbed car after tubbed car we're present. Of course I was there at 8 a.m. and didn't run 'til 12 or 1 p.m.

The centerforce will be nice. That thing was dumped anywhere from 4000 up to 5900! :eek: I thought the rear was going to come through the floor on that one! :lol:

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

I just ordered a new SPEC stage 1...

hope to install within the next week or so!

Oh boy, I hope she gets here soon. The tranny is getting much worse. :( 1st gear is basically completely useless now.

Re: (scorp508)
 

and I am worried a bit about slippage... gee... I gots life easy...

I am beginning to think all of Curtis' bad luck is moving north east....

Re: (bogus)
 

Hope you have good luck with the clutch, i've heard nothing but horrible remarks on the centerforce in an LT1 car. The design was supposedly changed, maybe that fixed the problems. How much was the clutch if you don't mind me asking? More that $400?

$309.99 + shipping. ($32 more for the T/O bearing)

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

Good choice, little bit of extra money, but you'll get more mileage out of it.
I have this one for my 1995 Nissan Maxima 5speed (lightly modded) and it has taken regular beatings from heck for the last 3 years and 40,000 miles. I am talking missed shifts, and let the clutch out at 7000 RPM on accident, (oops).

It works fine now, although like anything else is not nearly as crisp as when new. I am sure had I had a stock replacement that I would be on a new clutch by now....

Re: [Clutch]: Just ordered one, this ought to be fun. (dizwiz24)
 

I put on in a 90 Nissan 300ZX TT and the thing didn't last a summer I would never want to install anther on in a car again.

Re: [Clutch]: Just ordered one, this ought to be fun. (John G 92)
 

Well I don't know what happened to you but maybe you got your finger prints on the clutch surface or didn't do the proper break in. All I know is everyone from Corvette World (formerly Corvette's of Dallas) use em to great effect. Plus I just had a Dual Friction installed today, hehehe, and hopefully I will continue the great history of this clutch.

Re: [Clutch]: Just ordered one, this ought to be fun. (scorp508)
 

Scorp,
I put one in last year...NICE CLUTCH!!! I hope you plan on changing your flywheel too (GM reccomends that you DO NOT turn a Corvette flywheel; I don't know why, I just took their suggestion!). I also went from the stock brass pilot bushing to a roller bearing style pilot bearing.
Swapping clutches in these cars does suck, especially trying to get the driveshaft tunnel support beam in and out. But once you're all done, you'll be extremely pleased...no more high RPM slippage, chatter, etc.
Good luck!

Re: [Clutch]: Just ordered one, this ought to be fun. (Mark85Vett)
 

I think the rules only apply to the later dual mass flywheels...

Re: [Clutch]: Just ordered one, this ought to be fun. (Mark85Vett)
 

You can turn the LT1 flywheel with no problem at all, just had mine done this weekend when they installed my Centerforce Dual Friction...itz soooo badazz!


[Modified by XtremeVette420, 12:12 PM 3/31/2002]

Re: [Clutch]: Just ordered one, this ought to be fun. (XtremeVette420)
 

keep us posted. I am curious to see how long it holds up.