CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C1 & C2 Parts (https://www.corvetteforum.com/forums/c1-and-c2-parts-59/)
-   -   1965 396 Parts - Collection of Links - Add yours (https://www.corvetteforum.com/forums/c1-and-c2-parts/2704042-1965-396-parts-collection-of-links-add-yours.html)

Larry N. Johnson 10-17-2010 11:45 PM

1965 396 Parts - Collection of Links - Add yours
 
A few of us are looking for 396 parts.
A few people have extra parts.

This thread is dedicated to collecting current threads all the related links in one place.
Please add yours or some that you find of interest.
Please delete those that are no longer current.

Please add the "F/S" or "WTB" if needed.

Here is the list so far:

PARTS FOR SALE

F/S: 1965 Corvette 396 rear end

F/S: B-B HiPerf Head Gaskets

F/S: 2 pairs of NOS GM 396 side flags: agump agump@rogers.com

F/S: Original 396 Std Front Sway Bar

F?S: 65 396 Top Ignition Shield

F/S: 65 396 Spark Plug Heat Shields - New (SOLD)

F/S: F-40, F-41, & FE-7 Shocks (SOLD)

F/S: 403 Bell Housing

F/S: 1965 396 425 hp 4 bolt block 3855962 (Non-Corvette stamp but Corvette casting)

F/s 1965 396 425 hp 4 bolt block 3855962

F/S: 1965 396 Fresh Shortblock (Non-Corvette)

F/S: 1965 396 3124 Carb, FA-370 Rear, 208 Heads

F/S: 1965 396 Radiator Shrouds

3856208-heads-pair-must-go

F/S: 1965 396 Big Block Heads

F/S: Rebuilt-208 65 396 Heads

F/S: 3856208 heads

F/S: Pair of 1965 396 3856208 Heads - Bare

F/S two 1965 396 425hp Engines

F/S 1965 396 Holley Carb 3124 Dated 573 - needs rebuild

F/S: 1965 396 3856284 big block water pump B-26-5

PARTS WANTED

WTB: Thermostat Housing Bolts for '65 L78

WTB: Starter Solenoid 1114356

WTB: 396 Cooling Fan

WTB: 65 BB Hood

WTB: 1965 396 Front Carb Bowl

WTB: 1965 396 Intake Manifold (FOUND)

WTB: Clean air tube 396/425

WTB: Air Cleaner for 396 Corvette in any condition by billd1954

Wanted: front float bowl for my 3124...and an april or may carb body TESTADURO

WTB: I am looking for the 8" timing chain cover for my motor, it is a AO tab with no dowel holes. Thanks Rob O' 516 790 4466 vettcorob

WTB: Looking for a March/April of 1965 "962" block; Thanks, George 210 748 4693 geopar@gvtc.com 1960fi

What other links can we add?

Larry N. Johnson 10-18-2010 12:17 AM

Also Tech related info to ID 396 parts correctly:

C2 Trim Tag Decode

1953-1967 Corvette Specifications, VIN ID, Castings, etc.

Chev Big Block Casting Numbers

Head Casting Numbers - 1964 - 72

396 Drive Shaft Universal Joint

What is a 396 Car - How to tell?

Is it a big block car?

65 Bell Housing

Help on installing bushings in rear sway bar for 65 BB

Sidepipes on a 65 396 (exhaust manifold ID)

396 Cooling Fan

396 Battery Retainer

65 Big Block Tune Up Data

'65 - 396 Experts I need your help identifying a 65 "962" block

Please Help Determine If These #'s Are Correct

Content of F40 Suspension Package in a 65

1965 396 Documentation

Tech Info: 65 396 TI Ignition Issue with Advise

1965 early & late 396

1965 396 spark plug heat shields (& Dip Stick)

esjbh2 10-18-2010 11:22 AM

Larry, you do realize that the short block is not correct for a Corvette, right? It's a 3855961 casting whereas the correct Corvette 396 casting is 3855962. Not saying there's anything wrong with it, just not original.

-Jack H.

Larry N. Johnson 10-18-2010 11:58 AM

Maybe a list might help us at one time or another.

Guys working on or own 1965 396 Vettes

1. 65 396 (Cliff) from Colorado

2. Larry N. Johnson from Utah --> SOLD to Pete Emery of Oregon June 2015

3. TESTADURO from California

4. fiberglassjunkie (Wayne Soojian) from NM

5. Eric Voigt from Riverside, CA Image

6. billd1954 (Bill Donovan) from MA

7. Fairway-J (Jonathan) from IL

8. 66racer (Elmer Schuster) from New Mexico

9. jbalch (Jody Balch) from Clovis, NM

10. 65 BB Rat from ?

11. Blue 396 (Carl) from Texas

12. midstyle (Wayne Midkiff) from Calgary, Alberta Canada The last 396 (and last '65 Corvette)

13. RGS (Dick) from Iowa

14. Chuck Pelton from Michigan

15. woodsdesign (Lawrence S. Woods) from Macedonia, Ohio

16. FASTZ (Paul R. Zailey) from Ohio

17. nfran (Nick Francoforte) from Windermere FL

18. Mark Lovejoy from Bloomfield, Connecticut Image

19. JSieczkos (John Sieczkos) from Johnson City, NY

20. rovers2000 (Lance Roversw) from Chazy, NY

21. bill3302 from MA

22. 65747785 (Ben) from PA

23. SBR (Steve A. Bramati) from Illinois

24. revupL78 (Greg) from Lake Dale, Indiana

25. 65BB RAGTAP(Scott) from Louisville, Kentucky

26. gary6672 (Gary Cowans) from Perth,Western Australia

27. dplotkin Dan from New England silver convert see Avatar

28. ButtonHead (Rob) from? See here.

29. dahohan from 10th District Court, OHIO

30. Raymond G from ?

31. EddieG from Merritt Island, Florida Image Image 2

32. Tiros from Somewhere in NJ

33. tedbb65 from ?

34. DanielJ from ? see Image

35. thorson Jim Thorson from Grande Prairie, Alberta - See Image

36. pamotorman from PA? my 1965 396 corvette VIN 114271 was a st louis factory pick up on 4/16/65.

37. brettg Brett Guinta from Greenwich, CT

38. Mike 1958 from ?

39. johncorvette1965 from ?

40. Patman65 from ?

41. vetteking62 (Frank Semkow, Jr.) from Colchester, CT

42. BIG BLOCK JAMO (Paul B. Jamieson) from from Studio City, CA

43. 63vetteman (Tom Berardo) from Paramus NJ

44. gsouth (Gene South) from McKinney, Texas

45. Jim McCann Stratford Ontario, Canada

45. stingjay396 from E. Hazel Crest, Illinois

46. albaseball (Alexander V. Wallace) from Mesa, AZ Milano Maroon Coupe

47. MidVette6067 Tom 810-338-0307 from (info to come) Big Block Coupe for Racing

48. 2hrlygrams Mike from Eastern WA State 509-649-2569 Goldwood Yellow/Black 396 Coupe

49. 396-425 "I've got a NOM 65 396. Original side pipe car. White. Black interior."

50. ajrothm from League City, TX

51. petuniapilot Kathy from Anchorage, Alaska

52. kiserk1 (Keith Kiser)Asheville NC, Red Convert., Blk std interior, Hard and Soft Top, PW, Tele, Backup Lmps

53. stingjay396 (Jay Janko) from E. Hazel Crest, Ill - 1965 396/425hp conv. owned since 1975

54. hrotman1966 (Howard Rothman) from Santa Fe, TX

55. desert65 396 car w 327 installed, red convertible

56. 1960fi (George Wright) from Spring Branch, Texas--coupe/green/black

57. provette67 from Kirtland, Ohio

58. 20round (Troy Teichthesen) from Montague, Michigan "VIN # 115926 roadster factory side exhaust, glenwood green, vintage history back to the 60s early 70s..and I have known of the car for 40 yrs."

59. Tommy Jay (Tommy Ingram) from Conway, Arkansas VIN 194675s121755

60. Alan from League City, TX

61. vettcorob Rob O'Neill 1965 396 Glen Green coupe w/green vinyl, VIN 18150 owned 26 years, Long Island, N.Y. Originally from Hicks Chevrolet in Washington DC

62. Spine717 Morgenstern Chiropractic from Gettysburg, PA numbers matching, Vin 122131 1965 396/425 coupe Nassau Blue, blue vinyl interior

63. 71scgc Carter 1965 BB coupe, vin 116470, Nassau Blue/White. Originally sold in Montreal, Canada.

64. c322348 VIN 119468 Nassau Blue/Blue Leather 396 Convertible Located in Fullerton, California

65. vettcorob Rob O'Neill Found in Barn 1965 396 Roadster Nassau Blue / Black vinyl, 119009 AO Smith car, Long Island, NY

66. Fox-2-23 65 Glen green coupe 31,210 miles It Spencer J. Salt Lake City Utah my father was the second owner I am the third.
Any others?

Larry N. Johnson 10-18-2010 06:54 PM

added the two bell housings available.

TESTADURO 10-19-2010 03:02 PM

I am also looking for a front float bowl for my 3124...and an april or may carb body if thats possible. Thanks

agump 10-23-2010 10:09 PM

NOS 1965 Corvette 396 Fender Emblem (2 pairs)
 
I have 2 pairs of NOS GM 396 side flags from the mid seventies, left over from my car. Will trade other 65 items, now have 350 HP nassau blue with blue and white interior roadster. Currently undergoing full body off restoration.
agump@rogers.com

Larry N. Johnson 10-25-2010 07:06 PM

added a couple more links and a few more 396 owners.

Larry N. Johnson 10-27-2010 11:55 AM

added the list of 396 owners

Larry N. Johnson 11-03-2010 01:34 PM

Added Chuck Pelton from Michigan to list of guys who own or are working on 65 396 cars.

Larry N. Johnson 11-06-2010 11:15 AM

added midstyle, woodsdesign, and nfran

Larry N. Johnson 11-11-2010 03:28 PM

Add:
F?S: 65 396 Top Ignition Shield

Larry N. Johnson 11-22-2010 02:47 PM

added info

Larry N. Johnson 11-25-2010 10:34 PM

added info

Larry N. Johnson 01-10-2011 01:24 PM

added Head Gaskets F/S

Larry N. Johnson 01-19-2011 11:07 AM

Added F/S: 3:55 rear end

Larry N. Johnson 01-25-2011 11:43 AM

Added 3856208-heads-pair-must-go

Raymond G 01-31-2011 06:50 PM

396 T.I. Coil Wanted
 

Originally Posted by Larry N. Johnson (Post 1575652047)
A few of us are looking for 396 parts.
A few people have extra parts.

This thread is dedicated to collecting current threads all the related links in one place.
Please add yours or some that you find of interest.
Please delete those that are no longer current.

Please add the "F/S" or "WTB" if needed.

Here is the list so far:

PARTS FOR SALE

F/S: 1965 Corvette 396 rear end

F/S: B-B HiPerf Head Gaskets

F/S: 2 pairs of NOS GM 396 side flags: agump agump@rogers.com

F/S: Original 396 Std Front Sway Bar

F?S: 65 396 Top Ignition Shield

F/S: 65 396 Spark Plug Heat Shields - New (SOLD)

F/S: F-40, F-41, & FE-7 Shocks (SOLD)

F/S: 403 Bell Housing

F/S: 1965 396 425 hp 4 bolt block 3855962 (Non-Corvette stamp but Corvette casting)

F/s 1965 396 425 hp 4 bolt block 3855962

F/S: 1965 396 Fresh Shortblock (Non-Corvette)

F/S: 1965 396 3124 Carb, FA-370 Rear, 208 Heads

F/S: 1965 396 Radiator Shrouds

3856208-heads-pair-must-go

F/S: 1965 396 Big Block Heads

F/S: Rebuilt-208 65 396 Heads

F/S: 3856208 heads

F/S: Pair of 1965 396 3856208 Heads - Bare


PARTS WANTED

WTB: Thermostat Housing Bolts for '65 L78

WTB: Starter Solenoid 1114356

WTB: 396 Cooling Fan

WTB: 65 BB Hood

WTB: 1965 396 Front Carb Bowl

WTB: 1965 396 Intake Manifold (FOUND)

WTB: Clean air tube 396/425

WTB: Air Cleaner for 396 Corvette in any condition by billd1954

Wanted: front float bowl for my 3124...and an april or may carb body TESTADURO

What other links can we add?

I have a 210 ignition coil with a crack on the top. I've heard that it can be repaired or re-skinned or I'll take a good original.
Raymond

Revfan 06-02-2012 05:05 PM

This was a cool thread...

Lazarus -- COME OUT!

(this is so much more than a parts for sale ad... how about waving the "sticky" magic wand and pinning this one up?)

MosportGreen66 06-03-2012 09:42 AM

I have an original 396 oil cap for sale. It's the very rare square S. Perfectly restored with a new gasket.... If interested PM me.

Dave


All times are GMT -4. The time now is 11:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands