CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C4 ZR-1 Discussion (https://www.corvetteforum.com/forums/c4-zr-1-discussion-50/)
-   -   Anyone know this Z??? (https://www.corvetteforum.com/forums/c4-zr-1-discussion/3296069-anyone-know-this-z.html)

jerkyboy 06-27-2013 02:54 PM

Anyone know this Z???
 
Hey all, starting to think about another C4 and saw this ad pop up on fleabay. Is this a member z or does anyone know anything about it? it's not too far from me. Might be a nice successor to my dearly departed 434 :rock:

http://cgi.ebay.com/ebaymotors/Lingenfelter-Corvette-ZR-1-623HP-402c-i-21-385-Miles-Garage-Kept-/281127646530?pt=US_Cars_Trucks&hash=item4174837542

LT5corsa 06-27-2013 04:14 PM

This car has been for sale for a while... Very nice car with sweet upgrades!!!!!

If you wanted the car checked out, I'm about 1.5 hrs away

:cheers:

David

lkl2005 06-27-2013 04:31 PM

Looks like an LT5, I mean would there not be some mods?

jerkyboy 06-27-2013 08:52 PM

Thanks for the offer David. I'm 45 min away myself. I'll keep an eye on it.:thumbs:

mgg 06-28-2013 09:38 PM

Dave, long time since we have talked. Stop by the house sometime so we can catch up. Love to go look at that Z with you. Good to see you are around!
Mike

jerkyboy 06-29-2013 03:51 PM

Hey Mike!! good to hear from you. I will certainly stop by. You still owe me a ride!!



Originally Posted by mgg (Post 1584276540)
Dave, long time since we have talked. Stop by the house sometime so we can catch up. Love to go look at that Z with you. Good to see you are around!
Mike


SurfnSun 06-29-2013 04:49 PM

How does 623 crank hp end up at 492rwhp? That seems like a big loss.

blownrunner 06-30-2013 12:03 AM

Here is another one in the Tampa area:
http://tampa.craigslist.org/hil/cto/3822257299.html

Rkreigh 07-01-2013 09:25 PM


Originally Posted by SurfnSun (Post 1584282160)
How does 623 crank hp end up at 492rwhp? That seems like a big loss.

hey surf, I noticed that too

for a frame of reference

my lpe 390 pulls 619 on the motor stand at LPE and and 508 at the tire on the rollers. LPE "optimizes" the motor dyno with the coolant and oil at just the right temps the LPE runs typically show the best the engine puts out. drivetrain loss, dyno variations, correction factors, dyno operators, all make the readings vary a bit for how much power read out. run the same car on another dyno and it might be 500+

493 is "in the the ball park" and pretty stout for a 402

anywhere near 500 at the tire is a handfull of ponies plus or minus 10 doesn't matter too much. it's about all you can hook even with really aggressive tires. the car is running right if it puts 493 down.

FYI

I did a pull at 50 deg at a "familiar" dyno in springfield and the uncorrected RWHP was 532

on a cool day with the right air the engine not only FEELS stronger it is

there is no "correction factor" for what power actually hits the pavement and the LT5 loves a nice cool dry day

my bet is that this car is pretty stout

anyone know the owner??? like to go check it out.

I sent him a message on fleabay but haven't hear back.


All times are GMT -4. The time now is 02:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands