Typical Cylinder Airmass on healthy HCI Z06
Just wondering what kind of Cylinder Airmass you guys are seeing/hitting on a typical HCI Z06 in the 600whp range...
Had my car retuned after a header swap and my tuner changed up my tune, for the better. I only picked up about 10whp and 2wtq peak but he was saying that the car was hitting down into the 1.26 g/cyl range and that I saw notice a considerable difference on the street, in the upper rpms. Unfortunately, I never paid too much attention to that table before, so I don't know how much that changed. I try to watch the changes he makes just to learn a little more about the process. Mod list is: Lingenfelter ported stock castings .050" mill Mamo MSD NW102 Vararam TSP 4.2 cam (248/260 .656/.656 111+3LSA) ID1000s E85 ARH 1-7/8" headers w/ catted x-pipe LG GT4 exhaust Put down 612whp/537wtq, uncorrected. Somewhere North of 630whp/560wtq corrected. |
1.26 is pretty good.... Was it staying around 100 kpa or higher?
|
Originally Posted by Frans96ss
(Post 1596264682)
1.26 is pretty good.... Was it staying around 100 kpa or higher?
Unfortunately I didn’t pay attention to KPa at the time. I’m running the vararam so I’m assuming it was, at least, 99-100 |
Looking at my logs I'm also getting 1.26 average, peaking 1.30 at some rpm points.
|
Originally Posted by Josh B.
(Post 1596367823)
Looking at my logs I'm also getting 1.26 average, peaking 1.30 at some rpm points.
|
All times are GMT -4. The time now is 12:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands